この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 96, クレーン、小委員会 SC 6, 移動式クレーンによって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 4301-2:2009) を取り消して置き換えるものです。
前版からの主な変更点は、ISO 4301-1:2016 に準拠した移動式クレーン機器のサイクルベースの分類の導入です。
ISO 4301 シリーズのすべての部品のリストは、ISO Web サイトにあります。
序章
移動式クレーンは、定格容量内の重量の荷物を持ち上げて移動することにより、荷役の役割を果たします。ただし、その職務にはさまざまなバリエーションがあります。クレーンの設計は、購入者の要件に沿った適切なレベルの安全性と耐用年数に到達するために、使用条件の観点から義務を考慮に入れる必要があります。
分類は、特定の移動式クレーンを意図したサービスに適合させることができる、購入者と製造業者の間の参照フレームワークとして機能します。また、移動式クレーンの設計の合理的な基盤を確立する手段を提供するために使用されるシステムでもあります。
1 スコープ
この文書は、主に以下によって表現される使用条件に基づいて、移動式クレーンおよび関連するクレーン機構の一般的な分類を確立します。
- クレーンの指定された設計寿命中に実行される作業サイクルの総数;
- 取り扱う荷重の相対周波数を表す荷重スペクトル係数。
- 平均荷重変位。
このドキュメントは、表 2 で説明されているように、中程度から非常に重い作業サイクル数までの作業範囲に適用されます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4301-1, クレーン — 分類 — 1: 一般
- ISO 4306-1, クレーン — 語彙 — 1: 一般
- ISO 4306-2, クレーン — 語彙 — 2:移動式クレーン
3 用語と定義
このドキュメントの目的のために、ISO 4301-1, ISO 4306-1, および ISO 4306-2 に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 6, Mobile cranes.
This third edition cancels and replaces the second edition (ISO 4301-2:2009), which has been technically revised.
The main change compared to the previous edition is the introduction of the cycle-based classification for mobile cranes equipment following ISO 4301-1:2016.
A list of all parts in the ISO 4301 series can be found on the ISO website.
Introduction
Mobile cranes play a part in the handling of materials by raising and moving loads, the mass of which is within their rated capacity. However, there can be wide variations in their duty. The design of the crane should take account of the duty in terms of conditions of service, in order to reach an appropriate level of safety and useful life which is in line with the purchaser’s requirements.
Classification serves as a reference framework between purchaser and manufacturer, by which a particular mobile crane can be matched to the intended service. It also is the system used to provide a means of establishing rational bases for the design of mobile cranes.
1 Scope
This document establishes a general classification of mobile cranes and related crane mechanisms based on the service conditions, mainly expressed by the following:
- the total number of working cycles to be carried out during the specified design life of the crane;
- the load spectrum factor which represents the relative frequencies of loads to be handled;
- the average load displacements.
This document is applicable for the work spectrum between moderate to very heavy number of work cycles as described in Table 2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4301-1, Cranes — Classification — 1: General
- ISO 4306-1, Cranes — Vocabulary — 1: General
- ISO 4306-2, Cranes — Vocabulary — 2: Mobile cranes
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4301-1, ISO 4306-1 and ISO 4306-2 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: