この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 4306-1 は、技術委員会 ISO/TC 96, クレーン、サブ委員会 SC 2, 用語によって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 4306-1:1990) を廃止し、置き換えます。
ISO 4306 は、一般タイトル「Cranes — Vocabulary」の下に、次の部分で構成されています。
- Part 1: 一般
- Part 2: 移動式クレーン
- Part 3: タワークレーン
- Part 5: ブリッジ クレーンとガントリー クレーン
範囲ISO 4306 は、クレーンの分野で最も一般的に使用される用語の語彙を確立します。
ISO 4306 のこの部分では、主なクレーンのタイプと分類、パラメータ、一般概念、および構成部品に関する用語が定義されています。
注一部の定義を示す図は、一般的なガイダンスとしてのみ提供されています。
用語と定義
クレーン
フックまたは他の荷扱い装置によって吊り下げられた荷を吊り上げ、空間内で移動することを目的とした周期動作機械
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4306-1 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 2, Terminology.
This fourth edition cancels and replaces the third edition (ISO 4306-1:1990), which has been technically revised.
ISO 4306 consists of the following parts, under the general title Cranes — Vocabulary:
- Part 1: General
- Part 2: Mobile cranes
- Part 3: Tower cranes
- Part 5: Bridge and gantry cranes
Scope ISO 4306 establishes a vocabulary of the most commonly used terms in the field of cranes.
This part of ISO 4306 defines terms concerning the main crane types and classifications, parameters, general concepts and component parts.
NOTE Diagrams illustrating some of the definitions are given only for general guidance.
Terms and definitions
crane
cyclic action machine intended for the hoisting and moving in space of a load suspended by means of a hook or other load-handling device