ISO 4316:1977 界面活性剤—水溶液のpHの測定—電位差滴定法 | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。

技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。

国際規格 ISO 4316 は ISO/TC91界面活性剤技術委員会によって開発され、1975 年 8 月に加盟団体に配布されました。

以下の国の加盟団体によって承認されています。

オーストラリアインドスペイン
オーストリアイランスイス
ベルギーイタリアタイ
ブラジルオランダ七面鳥
カナダニュージーランドイギリス
エジプト、アラブ共和国ポーランドアメリカ合衆国
フランスポルトガルユーゴスラビア
ドイツルーマニア
ハンガリー南アフリカ共和国

次の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。

日本

1 適用範囲と分野

この国際規格は、界面活性剤の水溶液の pH を測定する方法を規定しています。

この方法は、各製品の特定の規格にそのように示されている場合にのみ適用されます。

2 参考文献

  • ISO 607, 界面活性剤 - 洗剤 - サンプル分割方法。 1)

FOREWORD

ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.

International Standard ISO 4316 was developed by Technical Committee ISO/TC91, Surface active agents, and was circulated to the member bodies in August 1975.

It has been approved by the member bodies of the following countries:

AustraliaIndiaSpain
AustriaIranSwitzerland
BelgiumItalyThailand
BrazilNetherlandsTurkey
CanadaNew ZealandUnited Kingdom
Egypt, Arab Rep. ofPolandU.S.A.
FrancePortugalYugoslavia
GermanyRomania
HungarySouth Africa, Rep. of

The member body of the following country expressed disapproval of the document on technical grounds:

Japan

1 SCOPE AND FIELD OF APPLICATION

This International Standard specifies a method for the determination of the pH of aqueous solutions of surface active agents.

This method is applicable only if so indicated in the specific standard for each product.

2 REFERENCE

  • ISO 607, Surface active agents — Detergents — Methods of sample division. 1)