この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 4324 は、ISO/TC91界面活性剤技術委員会によって開発され、 1975 年 10 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | ポルトガル |
| オーストリア | イラン | ルーマニア |
| ベルギー | イタリア | 南アフリカ共和国 |
| ブラジル | 日本 | スペイン |
| カナダ | 韓国 | スイス |
| エジプト、アラブ共和国 | メキシコ | 七面鳥 |
| フランス | オランダ | イギリス |
| ドイツ | ニュージーランド | アメリカ合衆国 |
| ハンガリー | ポーランド | ソビエト連邦 |
この文書に反対を表明した加盟団体はなかった。
0 はじめに
粉末および顆粒の安息角を決定すると、特にサイロなどでの粉末の保管特性に関する情報が得られる可能性があります。
1 適用範囲と分野
この国際規格は、粉末または粒状の界面活性剤および凝集物のない粉末洗剤の安息角を測定するための従来の方法を規定しています。
この方法は、同等の特性を持つ他の粉末や顆粒にも適用できます。
3 定義
この国際規格では、次の定義が適用されます。
安息角
指定された条件下でフローによって取得された円錐の底角。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federationof national standards institutes (ISO member bodies). The work of developingInternational Standards is carried out through ISO technical committees. Everymember body interested in a subject for which a technical committee has been setup has the right to be represented on that committee. International organizations,governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulatedto the member bodies for approval before their acceptance as InternationalStandards by the ISO Council.
International Standard ISO 4324 was developed by Technical CommitteeISO/TC91, Surface active agents, and was circulated to the member bodies in October 1975.
It has been approved by the member bodies of the following countries:
| Australia | India | Portugal |
| Austria | Iran | Romania |
| Belgium | Italy | SouthAfrica,Rep.of |
| Brazil | Japan | Spain |
| Canada | Korea,Rep.of | Switzerland |
| Egypt,ArabRep.of | Mexico | Turkey |
| France | Netherlands | UnitedKingdom |
| Germany | NewZealand | U.S.A. |
| Hungary | Poland | U.S.S.R. |
No member body expressed disapproval of the document.
0 INTRODUCTION
Determining the angle of repose of powders and granulesmay give information on the storage properties of thepowder, especially in silos, etc.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies a conventionalmethod for the determination of the angle of repose ofsurface active agents in powder or granular form andof washing powders, free from agglomerates.
This method is also applicable to other powders andgranules with comparable properties.
2 REFERENCES
- ISO 554, Standard atmospheres for conditioning and/ortesting — Specifications.
- ISO 607, SurfaceactiveagentsDetergents-Methodsofsampledivision. 1)
3 DEFINITION
For the purposes of this International Standard, the following definition applies:
angle of repose
The base angle of the cone obtained byflow under the specified conditions.