※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 の編集規則に従って起草されました。 www.iso.org/directives
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 特有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 113, 比重測定、サブ委員会 SC 5, 機器、装置およびデータ管理です。
この第 3 版は、技術的に改訂された第 2 版 (ISO 4375:2000) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、流量計測に使用する索道システムの機器、固定具、サポートおよび付属品の要件を定義します。完全に川岸から、または吊り下げられた人員輸送車 (「ケーブルカー」とも呼ばれます) から操作されるシステムについて説明します。この国際規格は、水圧測定に使用される索道システムにのみ適用されます。索道設備が吊り上げ装置として認定される必要がある場合は、他の規格または規制が適用される場合があります。この国際規格は、ISO 748 に記載されている排出量測定の方法には関係しません。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 772, 比重測定 - 語彙と記号
- ISO 80000-4, 数量と単位 - Part 4: 力学
3 用語と定義
この文書の目的上、ISO 772, ISO 80000-4 および以下で与えられる用語と定義が適用されます。
3.1
ケーブル
索道システム内で固定または移動する、単純または複雑な構造のワイヤ ロープまたはワイヤ コード
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 113, Hydrometric determinations, Subcommittee SC 5, Instruments, equipment and data management.
This third edition cancels and replaces the second edition (ISO 4375:2000), which has been technically revised.
1 Scope
This International Standard defines the requirements for equipment, anchorage, supports and accessories for cableway systems for use in stream gauging. Systems which are operated either entirely from the river bank or from a suspended personnel carriage (also called a “cable car”) are discussed. This International Standard is only applicable to the cableway systems to be used for hydrometric measurements. Should the cableway installation be required to be certified as lifting equipment, other standards or regulations may apply. This International Standard does not concern methods for making a discharge measurement which are described in ISO 748.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 772, Hydrometry — Vocabulary and symbols
- ISO 80000-4, Quantities and units — Part 4: Mechanics
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 772, ISO 80000-4 and the following apply.
3.1
cable
wire rope of simple or complex structure or wire cord, fixed or moving in a cableway system
Bibliography
| 1 | ISO 748, Hydrometry — Measurement of liquid flow in open channels using current-meters or floats |
| 2 | ISO 3454, Hydrometry — Direct depth sounding and suspension equipment |