※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 123 技術委員会、すべり軸受、SC 2 分科会、材料および潤滑剤、その特性、特性、試験方法および試験条件によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4386-3:1992) を廃止し、置き換えます。前版との主な変更点は以下の通りです。
— スコープが変更されました。
— 基準参照が更新されました。
— 新しい第 3 条の用語と定義が追加されました。
— 文書は再構成されました。
— すべての条項が技術的に修正されました。
— 付録 A の数値が更新されました。
— 参考文献は削除されました。
ISO 4386 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書では、ベアリングの滑り面の接着欠陥や不連続性を判断するための非破壊浸透探傷試験を規定しています。
検出には侵入方式が使用されます。
- a) ISO 4386-1 に規定されている超音波試験法では検出できない、多層すべり軸受の端面の軸受裏当て材/軸受材料と端面との接合面との間の移行領域における接着欠陥、および
- b)ベアリングの滑り面の不連続性。
貫通法は、完成した多層すべり軸受に原則として適用できます。
接着試験は通常、鋼、鋳鋼、または鋳造青銅からなる裏材を備えた鋳造多層すべり軸受に対して実行されます。また、他の軸受材料タイプの製造プロセスの欠陥の検出を支援する非製造方法としても使用できます。パーライト鋳鉄、防錆鋼、鋳造アルミニウムなど、錫めっきができない、またはめっきが困難な軸受裏当ては、軸受材料と軸受裏当ての間に接着ができないため、テストできません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4386-1, 滑り軸受 — 金属多層滑り軸受 — Part 1: 厚さ 0.5 mm 以上の接着部の非破壊超音波試験
- ASTM-E 1417, 液体浸透探傷試験の標準実務
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 123, Plain bearings, Subcommittee SC 2, Materials and lubricants, their properties, characteristics, test methods and testing conditions.
This second edition cancels and replaces the first edition (ISO 4386-3:1992), which has been technically revised. The main changes compared to the previous edition are as follows:
— The Scope has been changed.
— Normative references have been updated.
— A new Clause 3 Terms and definitions has been added.
— The document has been restructured.
— All clauses have been technically revised.
— The figures in Annex A have been updated.
— The Bibliography has been deleted.
A list of all the parts in the ISO 4386 series can be found on the ISO website.
1 Scope
This document specifies a non‑destructive penetrant testing for determining bond defects and discontinuities in the sliding surface of the bearing.
The penetration method is used to detect
- a) bond defects in the transitional area between the bearing backing/bearing material on the end faces and joint faces of multilayer plain bearings which cannot be detected by the ultrasonic testing method specified in ISO 4386-1, and
- b) discontinuities in the sliding surface of the bearing.
The penetration method is applicable, in principle, to finished multilayer plain bearings.
The bond test is usually carried out on cast multilayer plain bearings, with a backing consisting of steel, cast steel or cast bronze. It can also be used as a non-production method to aid detection of manufacturing process defects with other bearing material types. Bearing backings which cannot be tin-plated, or only with difficulty, such as perlitic cast iron, rust-resistant steel and cast aluminium, cannot be tested since no bond is possible between the bearing material and bearing backing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4386-1, Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
- ASTM-E 1417, Standard Practice for Liquid Penetrant Testing
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: