この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 4395 は、技術委員会 ISO/TC 131, 流体動力システム、小委員会 SC 3, シリンダーによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4395:1978) を取り消して置き換えるものです。
序章
流体動力システムでは、密閉回路内の圧力下で液体 (油圧の場合) または気体 (空気圧の場合) を介して動力が伝達および制御されます。
このようなシステムのコンポーネントの 1 つにシリンダーがあります。これは、動力を線形の機械力と運動に変換する装置です。これは、円筒形のボア内で動作する可動要素、つまりピストンとピストンロッドで構成されています。
1 スコープ
この国際規格は、油圧および空気圧流体動力システムで使用されるシリンダーに適用するためのピストン ロッド エンド タイプの基本シリーズを確立します。
これは、油圧および空圧シリンダーのピストン ロッド エンドで使用するためのねじの寸法と構成、およびシリンダー ピストン ロッドのねじ付きエンドをアクセサリに取り付けるために時々必要となるレンチ フラットとフック レンチ穴の寸法を指定します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 5598 に記載されている用語と定義が適用されます。寸法記号は ISO 6099 に準拠しています。
参考文献
| [1] | ISO 3320, 流体動力システムおよびコンポーネント — シリンダーのボアとピストンロッドの直径 — メートル系列 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4395 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.
This second edition cancels and replaces the first edition (ISO 4395:1978), which has been technically revised.
Introduction
In fluid power systems, power is transmitted and controlled through a liquid (for hydraulics) or a gas (for pneumatics) under pressure within an enclosed circuit.
One component of such systems is the cylinder. This is a device that converts power into linear mechanical force and motion. It consists of a moveable element, i.e. a piston and piston rod, operating within a cylindrical bore.
1 Scope
This International Standard establishes a basic series for piston rod end types for application on cylinders used in hydraulic and pneumatic fluid power systems.
It specifies thread dimensions and configurations for use with hydraulic and pneumatic cylinder piston rod ends, as well as the dimensions of wrench flats and hook wrench holes that are sometimes necessary for the assembly of the cylinder piston rod’s threaded end to accessories.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5598, Fluid power systems and components — Vocabulary
- ISO 6099, Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5598 apply. Dimension letter symbols are in accordance with ISO 6099.
Bibliography
| [1] | ISO 3320, Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series |