※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
内部標準 ISO 4439 は、技術委員会 ISO/TC 1.38, 流体の輸送のためのプラスチック パイプ、継手およびバルブによって開発され、1977 年 7 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | ポーランド |
| ベルギー | アイルランド | ルーマニア |
| ブルガリア | イスラエル | 南アフリカ共和国 |
| チリ | イタリア | スペイン |
| チェコスロバキア | 日本 | スウェーデン |
| デンマーク | 大韓民国 | スイス |
| フィンランド | メキシコ | 七面鳥 |
| フランス | オランダ | ソビエト連邦 |
| ドイツ、フランス | ニュージーランド | ユーゴスラビア |
| ギリシャ | ノルウェー |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
イギリス
アメリカ
1 適用範囲と適用分野
この国際規格は、可塑化されていないポリ塩化ビニル (PVC) のパイプおよび付属品の密度を決定する方法を指定し、この密度の許容限界を定めています。
パイプと継手の素材は、基本的にポリ塩化ビニルで、製造に必要な添加剤のみが添加されています。
この国際規格は、フィラーを含む化合物から作られたパイプおよび付属品、または気泡製品には適用されません。
2 参照
- ISO/R 1183, プラスチック — 気泡プラスチックを除く、プラスチックの密度および相対密度 (比重) を測定する方法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
Internal Standard ISO 4439 was developed by Technical Committee ISO/TC 1,38, Plastics pipes, fittings and valves for the transport of fluids, and was circulated to the member bodies in July 1977.
It has been approved by the member bodies of the following countries:
| Australia | India | Poland |
| Belgium | Ireland | Romania |
| Bulgaria | Israel | South Africa, Rep. of |
| Chile | Italy | Spain |
| Czechoslovakia | Japan | Sweden |
| Denmark | Korea, Rep of | Switzerland |
| Finland | Mexico | Turkey |
| France | Netherlands | USSR |
| Germany, F. R. | New Zealand | Yugoslavia |
| Greece | Norway |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
United Kingdom
USA
1 Scope and field of application
This International Standard specifies a method for the determination of density of pipes and fittings of unplasticized polyvinyl chloride (PVC) and lays down the permissible limits for this density.
The material from which the pipes and fittings are made is essentially polyvinyl chloride to which only the additives required for their manufacture have been added.
This International Standard does not apply to pipes and fittings made from compounds containing fillers, or to cellular products.
2 Reference
- ISO/R 1183, Plastics — Methods for determining the density and relative density (specific gravity) of plastics, excluding cellular plastics.