※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 139「塗料およびワニス」と協力して、ISO/TC 35 技術委員会「塗料およびワニス」小委員会 SC 9「塗料およびワニスの一般試験方法」によって作成されました。 ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従っています。
この第 3 版は、技術的に改訂された第 2 版 (ISO 4628-10:2016) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- タイトルは短縮されました。
- 糸状腐食の定義 (3.1) は ISO 4623-1:2018 に準拠しています。
- 基準参照が更新されました。
ISO 4628 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書では、最長フィラメントの長さL と最も頻繁に発生するフィラメントの長さM を測定することにより、スクライブマークから発生する糸状腐食の量を評価する方法が規定されています。
この文書の付録 A に示されている図例は、糸状腐食の程度のさまざまな評価を示しています。試験パネルと付録 A の 12 枚の写真との比較は、義務的な数値評価 (方法 1 または 2) に優先するものではありません。
ISO 4628-1 は、欠陥の量とサイズ、およびコーティングの外観の均一な変化の強度を指定するために使用されるシステムを定義し、システムの一般原則を概説しています。このシステムは、特に、次のような原因によって引き起こされる欠陥に使用することを目的としています。経年変化や風化、黄変などの色の変化などの均一な変化。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 13076, 塗料およびワニス — コーティングの視覚評価のための照明と手順
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
糸状腐食
塗料、ワニス、または関連製品のコーティングの下でスレッドの形で進行するタイプの腐食で、通常は裸の端またはコーティングの局所的な損傷から始まります。
注記 1:通常、糸の長さと成長方向は不規則ですが、ほぼ平行でほぼ同じ長さの場合もあります。通常、これらは押し出し方向に従い、互いに交差しません。それらは攻撃的なイオンによって開始されます。
[出典:ISO 4623-1:2018, 3.1, 修正済み —「する必要がある」を「する必要がある」に変更。]
参考文献
| 1 | ISO 4623-1:2018, 塗料およびワニス — 糸状腐食に対する耐性の決定 — Part 1: 鋼基材 |
| 2 | ISO 4628-1, 塗料およびワニス — コーティングの劣化の評価 — 欠陥の量とサイズ、および外観の均一な変化の強さの指定 — Part 1: 一般的な導入および指定システム |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 139, Paints and varnishes, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 4628-10:2016), which has been technically revised.
The main changes are as follows:
- the title has been shortened;
- the definition of filiform corrosion (3.1) has been aligned with ISO 4623-1:2018;
- the normative references have been updated.
A list of all parts in the ISO 4628 series can be found on the ISO website.
1 Scope
This document specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments.
Pictorial examples provided in Annex A of this document illustrate different ratings for the degree of filiform corrosion. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2).
ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 13076, Paints and varnishes — Lighting and procedure for visual assessments of coatings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
filiform corrosion
type of corrosion proceeding under a coat of paint, varnish, or related product, in the form of threads, generally starting from bare edges or from local damage to the coating
Note 1 to entry: Usually the threads are irregular in length and direction of growth, but they can also be nearly parallel and of approximately equal length. They usually follow the extrusion direction and do not cross over one another. They shall be initiated by aggressive ions.
[SOURCE:ISO 4623-1:2018, 3.1, modified —"need to" changed to"shall".]
Bibliography
| 1 | ISO 4623-1:2018, Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates |
| 2 | ISO 4628-1, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system |