※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 4637 は、技術委員会 ISO/TC 45, ゴムおよびゴム製品によって開発され、1978 年 4 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストリア | インド | スペイン |
| ベルギー | イタリア | スリランカ |
| ブラジル | 大韓民国 | スウェーデン |
| カナダ | メキシコ | スイス |
| チェコスロバキア | オランダ | タイ |
| エジプト、アラブ共和国 | ポーランド | 七面鳥 |
| フランス | ルーマニア | イギリス |
| ハンガリー | 南アフリカ共和国 | ソビエト連邦 |
この文書の不承認を表明した加盟団体はありませんでした。
1 適用範囲と適用分野
この国際規格は、直接張力下でのゴムと布地の接着を測定する方法を規定しています。これは、試験する材料が実質的に均一な厚さで平坦であるか、軽い圧力で平坦に維持できるほど十分に柔軟である場合にのみ適しています。これは、ストリッピングまたはピーリング法による試験が困難な非常に薄いゴム層を有する材料に特に適しています。ただし、この方法で得られた結果は、ISO/R 36「繊維布に対する加硫ゴムの接着強度の測定」に記載されているようなストリッピング テストで得られた結果と必ずしも相関しないことに注意してください。
2 参考文献
- ISO/R 468, 表面粗さ。
- ISO 2231, ゴムまたはプラスチックでコーティングされた生地 — コンディショニングとテストのための標準的な雰囲気。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 4637 was developed by Technical Committee ISO/TC 45, Rubber and rubber products, and was circulated to the member bodies in April 1978.
It has been approved by the member bodies of the following countries:
| Austria | India | Spain |
| Belgium | Italy | Sri Lanka |
| Brazil | Korea, Rep. of | Sweden |
| Canada | Mexico | Switzerland |
| Czechoslovakia | Netherlands | Thailand |
| Egypt, Arab Rep. of | Poland | Turkey |
| France | Romania | United Kingdom |
| Hungary | South Africa, Rep. of | USSR |
No member body expressed disapproval of the document.
1 Scope and field of application
This International Standard specifies a method for the determination of rubber-to-fabric adhesion under direct tension. It is only suitable when the material to be tested is substantially uniform in thickness and flat or sufficiently flexible to be maintained flat under light pressure. It is particularly suitable for materials having a very thin rubber layer which are difficult to test by stripping or peeling methods. However it should be noted that the results obtained by this method will not necessarily correlate with those obtained by a stripping test such as that described in ISO/R 36, Determination of the adhesion strength of vulcanized rubbers to textile fabrics.
2 References
- ISO/R 468, Surface roughness.
- ISO 2231, Fabric coated with rubber or plastics — Standard atmospheres for conditioning and testing.