この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 4, 転がり軸受、小委員会 SC 4, 公差、公差の定義および記号 (GPS を含む)です。
この第 3 版は、第 2 版 (ISO 464:1995) を取り消し、置き換えます。この第 2 版は、次の変更を伴う技術改訂を構成します。
- 幾何学的製品仕様 (GPS) の実装;
- テーブルの異なるプレゼンテーション。
序章
この国際規格は、ISO 14638 [7]のマトリックス モデルで示されている幾何学的製品仕様 (GPS) システムで定義されている機械要素の幾何学的規格です。
ISO 8015 [3]に示されている ISO/GPS の基本規則は、この国際規格に適用され、ISO 14253-1 [5]に示されているデフォルトの決定規則は、この国際規格に従って作成された仕様に適用されます。
機能要件、測定技術、および測定の不確かさの間の関係は、常に考慮されることを意図しています。伝統的に使用されている測定技術は、ISO 1132-2 [2]に記載されています。測定の不確かさについては、ISO 14253-2 [6]を考慮する必要があります。
小型ラジアル軸受の場合、 D < 30mm の場合、スナップ リング溝を製造すると軌道が歪む可能性があります。そのため、代わりにフランジ付き外輪付きベアリングを使用することをお勧めします。これらの小型軸受のスナップ リング溝とスナップ リングに関する情報は、付録 A と B に記載されています。
付属書 C および D には、スナップ リングの材料に関する有益な情報と正しい使用例が含まれています。
附属書 E には、スナップ リング溝の実際の図面表示の例が含まれています。
1 スコープ
この国際規格は、止め輪の溝寸法と公差値、外輪の止め輪溝側の面取り寸法、ラジアル軸受の止め輪の寸法と公差値を寸法系列18, 19と直径系列で規定しています。 ISO 15 で指定されている 0, 2, 3, および 4 (寸法系列 00, 82, および 83 を除く) [1] 。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 582, 転がり軸受 — 面取り寸法 — 最大値
- ISO 1101, 幾何学的製品仕様 (GPS) - 幾何公差 - 形状、方向、位置、振れの公差
- ISO 5593, 転がり軸受 - 語彙
- ISO 14405-1, 製品の幾何学的仕様 (GPS) - 寸法公差 - 1: 線形サイズ
- ISO 15241, 転がり軸受 — 物理量の記号
3 用語と定義
このドキュメントの目的のために、ISO 1101, ISO 5593, および ISO 14405-1 に記載されている用語と定義が適用されます。
参考文献
| [1] | ISO 15, 転がり軸受 — ラジアル軸受 — 主要寸法、一般図 |
| [2] | ISO 1132-2, 転がり軸受 — 公差 — 2: 測定とゲージングの原理と方法 |
| [3] | ISO 8015, 幾何学的製品仕様 (GPS) — 基礎 — 概念、原則、および規則 |
| [4] | ISO 8443, 転がり軸受 — フランジ付き外輪付きラジアル玉軸受 — フランジ寸法 |
| [5] | ISO 14253-1, 製品の幾何学的仕様 (GPS) — ワークおよび測定機器の測定による検査 — 1: 仕様への適合または不適合を証明するための判定規則 |
| [6] | ISO 14253-2, 製品の幾何学的仕様 (GPS) — ワークおよび測定機器の測定による検査 — 2: GPS 測定、測定機器の校正、および製品検証における不確かさの推定に関するガイダンス |
| [7] | ISO 14638, 幾何学的製品仕様 (GPS) — マトリックス モデル |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 4, Rolling bearings, Subcommittee SC 4, Tolerances, tolerance definitions and symbols (including GPS).
This third edition cancels and replaces the second edition (ISO 464:1995), of which it constitutes a technical revision with the following changes:
- implementation of Geometrical Product Specifications (GPS);
- different presentation of the tables.
Introduction
This International Standard is a machine element geometry standard as defined in the geometrical product specification (GPS) system as presented in the matrix model of ISO 14638 [7].
The fundamental rules of ISO/GPS given in ISO 8015 [3] apply to this International Standard and the default decision rules given in ISO 14253-1 [5] apply to the specifications made in accordance with this International Standard, unless otherwise indicated.
The connection between functional requirements, measuring technique and measuring uncertainty is always intended to be considered. The traditionally used measuring technique is described in ISO 1132-2 [2]. For measurement uncertainty it is intended that ISO 14253-2 [6] should be considered.
For small radial bearings, when D < 30 mm, manufacturing a snap ring groove might distort the raceways. As such, it is recommended to use bearings with a flanged outer ring instead. Information about snap ring grooves and snap rings for these small bearings can be found in Annexes A and B.
Annexes C and D contain informative information on snap ring material and an example of correct application.
Annex E contains an example of a real drawing indication of a snap ring groove.
1 Scope
This International Standard specifies the snap ring groove dimensions and tolerance values, chamfer dimensions on the snap ring groove side of the outer ring, and the snap ring dimensions and tolerance values for radial bearings in the dimension series 18 and 19 and the diameter series 0, 2, 3, and 4 (except dimension series 00, 82, and 83), as specified in ISO 15 [1].
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 582, Rolling bearings — Chamfer dimensions — Maximum values
- ISO 1101, Geometrical product specifications (GPS) ― Geometrical tolerancing ― Tolerances of form, orientation, location and run-out
- ISO 5593, Rolling bearings — Vocabulary
- ISO 14405-1, Geometrical product specifications (GPS) ― Dimensional tolerancing ― 1: Linear sizes
- ISO 15241, Rolling bearings — Symbols for physical quantities
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1101, ISO 5593 and ISO 14405-1 apply.
Bibliography
| [1] | ISO 15, Rolling bearings — Radial bearings — Boundary dimensions, general plan |
| [2] | ISO 1132-2, Rolling bearings — Tolerances — 2: Measuring and gauging principles and methods |
| [3] | ISO 8015, Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| [4] | ISO 8443, Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions |
| [5] | ISO 14253-1, Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — 1: Decision rules for proving conformity or nonconformity with specifications |
| [6] | ISO 14253-2, Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| [7] | ISO 14638, Geometrical product specifications (GPS) — Matrix model |