※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 263, 炭層メタン (CBM)によって作成されました。
1 スコープ
この文書は、石炭層メタン (CBM) 資源評価の目的、タスク、作業プロセス、分類、レポート作成、および承認を指定します。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 18871, 炭層メタン含有量の決定方法
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
炭層メタン
CBM
炭層 (および周囲の岩石) に自然に発生するメタンに富むガスで、通常 80% から 95% のメタンで構成され、エタン、プロパン、窒素、二酸化炭素の割合は低くなります。
注記1: 国際的に一般的に使用されているこの用語は、地表ボアホールを使用して採掘されていない炭層から回収されたメタンを指します。
[出典:ISO 18875:2015, 2.1]
3.2
CBMの存在量
単位面積あたりの炭化水素量
[SOURCE:ISO 18875:2015, 2.28, modified — 「資源」は用語から削除された]
3.3
CBM コンテンツ
石炭の単位質量あたりの炭化水素ガスの量。通常、標準温度および圧力 (STP) 条件下での石炭 1 トンあたりのガスの立方メートルで表されます。
注記1単位はm 3/tまたはcm 3/ STP 条件は 100,000 Pa および 0 °C (273.15 K) です。
[出典:ISO 18875:2015, 2.5]
3.4
資力
自然に発生した堆積物にもともと存在すると推定される、発見された、および発見されていない、回収可能および回収不可能な石油の量に加えて、すでに生産された量
3.5
埋蔵量
定義された条件下で、特定の日付以降の既知の蓄積に開発プロジェクトを適用することにより、商業的に回収できると予想される石油の量。
参考文献
| 1 | ISO 11760, 石炭の分類 |
| 2 | ISO 18875:2015, 炭層メタンの探査と開発 — 用語と定義 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 263, Coalbed methane (CBM).
1 Scope
This document specifies the objectives, tasks, work processes, classification, report preparation and acceptance of coalbed methane (CBM) resource evaluation.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 18871, Method of determining coalbed methane content
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
coalbed methane
CBM
methane-rich gas naturally occurring in coal seams (and surrounding rock) typically comprising of 80 % to 95 % methane with lower proportions of ethane, propane, nitrogen and carbon dioxide
Note 1 to entry: In common international use, this term refers to methane recovered from un-mined coal seams using surface boreholes.
[SOURCE:ISO 18875:2015, 2.1]
3.2
CBM abundance
amount of hydrocarbons in unit area
[SOURCE:ISO 18875:2015, 2.28, modified — “resource” has been deleted from the term.]
3.3
CBM content
volume of hydrocarbon gas per unit mass of coal, usually expressed in cubic metre of gas per tonne of coal under standard temperature and pressure (STP) conditions
Note 1 to entry: The unit is m3/t or cm3/g. STP conditions are 100 000 Pa and 0 °C (273,15 K).
[SOURCE:ISO 18875:2015, 2.5]
3.4
resource
quantities of petroleum, recoverable and unrecoverable, that are estimated to exist originally in naturally occurring accumulations, discovered and undiscovered, plus those quantities already produced
3.5
reserves
quantities of petroleum anticipated to be commercially recoverable by application of development projects to known accumulations from a given date forward under defined conditions
Bibliography
| 1 | ISO 11760, Classification of coals |
| 2 | ISO 18875:2015, Coalbed methane exploration and development — Terms and definitions |