この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 2, 試験および分析です。
この第 3 版は、5.1.2 が技術的に改訂された第 2 版 (ISO 4666-3:2010) を取り消して置き換えます。
ISO 4666 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
序章
屈曲圧縮下でのゴムの内部発熱の主な結果の 1 つは、ゴム内の温度上昇です。この文書は、温度上昇の測定を規定しています。
特に過酷な発熱・昇温条件では、疲労破壊に伴う試験片の内部破断が発生する場合があります。この種の疲労に対する耐性を測定するための準備も行われています。
試験は、選択された静的プレストレスまたは圧縮、およびプレストレスを与えられた試験片に加えられる一定の最大振幅の選択された繰り返しひずみの条件下で実施されます。
警告 1このドキュメントを使用する人は、通常の実験室の慣行に精通している必要があります。このドキュメントは、その使用に関連する安全上の問題のすべてに対処することを目的としていません。適切な安全衛生慣行を確立し、国内の規制条件を確実に遵守することは、ユーザーの責任です。
警告 2このドキュメントで指定されている特定の手順には、地域の環境に危険を及ぼす可能性のある物質の使用または生成、または廃棄物の生成が含まれる場合があります。使用後の安全な取り扱いと廃棄に関する適切な文書を参照する必要があります。
1 スコープ
この文書では、加硫ゴムの温度上昇と耐疲労性を測定するための一定ひずみ振幅によるフレキソメータ試験について規定しています。指定されたフレキソメータは、グッドリッチ フレキソメータとして知られていますが、同等の性能を示すその他の装置を使用できます。
このドキュメントは、タイヤ、ベアリング、サポート、V ベルト、およびケーブル プーリー インサート リングなど、使用中に動的な屈曲を受ける完成品のゴムの耐久性に関する予測を可能にする測定を実行するための指示を示します。ただし、サービス条件はさまざまに異なるため、このドキュメントのさまざまな部分で説明されている加速テストとサービス パフォーマンスとの間の単純な相関関係を想定することはできません。
この方法は、硬度が 85 IRHD を超えるゴムには推奨されません。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 48, ゴム、加硫または熱可塑性 — 硬度の測定 (10 IRHD と 100 IRHD の間の硬度)
- ISO 23529, ゴム — 物理的試験方法のための試験片の準備とコンディショニングの一般的な手順
- ISO 18899:2013, ゴム - 試験装置の校正ガイド
3 用語と定義
このドキュメントの目的のために、ISO 4666-1 に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 4666-1, ゴム、加硫 — フレキソメーター試験における温度上昇と疲労耐性の測定 — 1: 基本原則 |
| [2] | ISO/TR 9272:2005, ゴムおよびゴム製品 - 試験方法規格の精度の決定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis.
This third edition cancels and replaces the second edition (ISO 4666-3:2010), 5.1.2 of which has been technically revised.
A list of all parts in the ISO 4666 series can be found on the ISO website.
Introduction
One major consequence of the internal heat generation of rubber under a flexing compression is the development of an elevated temperature in the rubber. This document provides for the measurement of the temperature rise.
Under particularly severe heat generation and temperature rise conditions, internal rupture of the test piece can occur with fatigue failure. Provision is also made for the measurement of resistance to this type of fatigue.
The test is conducted under conditions of a selected static pre-stress or compression and a selected cyclic strain of constant maximum amplitude imposed upon the pre-stressed test piece.
WARNING 1 Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
WARNING 2 Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.
1 Scope
This document specifies the flexometer test with constant-strain amplitude for the determination of the temperature rise and resistance to fatigue of vulcanized rubber. The flexometer specified is known as the Goodrich flexometer, but any other apparatus giving equivalent performance can be used.
This document gives directions for carrying out measurements which make possible predictions regarding the durability of rubbers in finished articles subject to dynamic flexing in service, such as tyres, bearings, supports, V-belts, and cable-pulley insert rings. However, owing to the wide variations in service conditions, no simple correlation between the accelerated tests described in the various parts of this document and service performance can be assumed.
The method is not recommended for rubber having a hardness greater than 85 IRHD.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
- ISO 18899:2013, Rubber — Guide to the calibration of test equipment
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4666-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 4666-1, Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — 1: Basic principles |
| [2] | ISO/TR 9272:2005, Rubber and rubber products — Determination of precision for test method standards |