この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が認可された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 4755 は ISO/TC 2ファスナー技術委員会によって開発され、 1981 年 12 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | ニュージーランド |
| オーストリア | ハンガリー | ノルウェー |
| ベルギー | インド | ポーランド |
| ブラジル | アイルランド | ルーマニア |
| 中国 | イタリア | 南アフリカ共和国 |
| チェコスロバキア | 日本 | スペイン |
| デンマーク | 韓国、民主党代表 | スウェーデン |
| エジプト、アラブ共和国 | 大韓民国 | スイス |
| フィンランド | メキシコ | イギリス |
| フランス | オランダ | ソビエト連邦 |
次の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
アメリカ合衆国
1 適用範囲と適用分野
この国際規格は、ボルト、ネジ、および類似の外ねじ付き製品のねじ山アンダーカットの形状と寸法を規定しており、適切な製品規格に別段の指定がない限り、プラグなどのねじ山付き部品にアンダーカットが必要なwhere に使用することが推奨されています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 4755 was developed by Technical Committee ISO/TC 2, Fasteners, and was circulated to the member bodies in December 1981.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F.R. | New Zealand |
| Austria | Hungary | Norway |
| Belgium | India | Poland |
| Brazil | Ireland | Romania |
| China | Italy | South Africa, Rep. of |
| Czechoslovakia | Japan | Spain |
| Denmark | Korea, Dem. P. Rep. of | Sweden |
| Egypt, Arab Rep. of | Korea, Rep. of | Switzerland |
| Finland | Mexico | United Kingdom |
| France | Netherlands | USSR |
The member body of the following country expressed disapproval of the document on technical grounds:
USA
1 Scope and field of application
This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an undercut is needed for threaded components such as plugs, unless otherwise specified in the appropriate product standard.