※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 4875-2 は技術委員会 ISO/TC 29, Small toolsによって作成されました。
この ISO 4875-2 の第 2 版は、ISO 4875-2:1978 および ISO 4875-3:1978 を取り消して置き換え、そのうち技術的な改訂を構成します。
ISO 4875 は、次の部分で構成されており、一般的なタイトルはMetal-cutting band saw blades です。
- Part 1: 語彙
- Part 2: 特性と寸法
1 スコープ
ISO 4875 のこのパートでは、さまざまな種類の金属切断帯鋸刃の特性と寸法を指定しています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4875-1, 金属切断帯鋸刃 - Part 1: 語彙
- ISO 6507-1, 金属材料 — ビッカース硬度試験 — Part 1: 試験方法
- ISO 6508-1 、金属材料 — ロックウェル硬さ試験 — Part 1: 試験方法 (スケール A, B, C, D, E, F, G, H, K, N, T)
3 用語と定義
このドキュメントの目的のために、ISO 4875-1 および以下に記載されている用語と定義が適用されます。
3.1
炭素鋼帯鋸刃
炭素含有量が 1% を超え 1.5% 未満の低合金鋼で作られたブレードで、マンガン、シリコン、クロムの含有量の組み合わせが 0.5% 以上である
3.2
バイメタル帯鋸刃
歯が本体とは異なる素材でできている刃
3.3
フリクションカット帯鋸刃
摩擦から生じる熱によって切断するための耐疲労性鋼で作られた刃
3.4
複合鋼帯鋸刃
本体とは異なる材料の刃先で作られた刃で、刃先は一般に超硬で、本体は低合金鋼である
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4875-2 was prepared by Technical Committee ISO/TC 29, Small tools.
This second edition of ISO 4875-2 cancels and replaces ISO 4875-2:1978 and ISO 4875-3:1978, of which it constitutes a technical revision.
ISO 4875 consists of the following parts, under the general title Metal-cutting band saw blades:
- Part 1: Vocabulary
- Part 2: Characteristics and dimensions
1 Scope
This part of ISO 4875 specifies the characteristics and dimensions of the various types of metal-cutting band saw blades.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4875-1, Metal-cutting band saw blades — Part 1: Vocabulary
- ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method
- ISO 6508-1, Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4875-1 and the following apply.
3.1
carbon steel band saw blade
blade made of low alloyed steel containing more than 1 % and less than 1,5 % of carbon, the combination of manganese, silicon and chromium contents being not less than 0,5 %
3.2
bimetal band saw blade
blade whose teeth are made from a material different than that of the body
3.3
friction-cutting band saw blade
blade made of fatigue-resistant steel for cutting by heat resulting from the friction
3.4
composite steel band saw blade
blade made with a cutting edge of a material different from that of the body, the cutting edge being generally in carbide and the body in low alloyed steel