この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 4901 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 12, 熱硬化性材料によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4901:1985) を取り消して置き換えるものです (詳細については、「はじめに」を参照してください)
序章
この国際規格 ISO 4901:1985 の初版が発行されてから 25 年の間に、ガスクロマトグラフィーなどの分析技術は大幅に進歩しました。したがって、規格は完全に改訂されました。主な変更点は次のとおりです。
- a)ガスクロマトグラフィー法に加えて、ISO 4901 の初版には、代替として、ヨウ素滴定に基づく古典的な方法である Wijs 法が含まれていました。この方法は、ガスクロマトグラフィーが利用できない実験室のために初版に含まれていました。今日では、クロマトグラフィーは日常的な分析ツールと見なされているため、Wijs 法は標準から削除されています。
- b)充填ガスクロマトグラフィーカラムは、一般に、完全に異なる条件下で動作する開放管状カラムに置き換えられています。したがって、改訂された試験方法では、開いた管状のカラムのみが使用されます。
- c)さらに、ガスクロマトグラフィー法は、スチレンだけでなく、不飽和ポリエステル樹脂を製造する際の溶媒または出発物質として使用された可能性のある他の芳香族炭化水素をカバーするように拡張されました。
警告 — この文書を使用する人は、該当する場合、通常の実験室の慣行に精通している必要があります。このドキュメントは、その使用に関連する安全上の懸念があるとしても、そのすべてに対処することを目的としていません。適切な安全衛生慣行を確立し、規制要件を確実に遵守することは、ユーザーの責任です。
1 スコープ
この国際規格は、重合状態の不飽和ポリエステル (UP) 樹脂をベースとする強化プラスチック中の残留スチレンモノマーをガスクロマトグラフィーで測定する方法を規定しています。残留スチレンモノマー含有量は、重合状態での UP 樹脂の硬化度を評価する上で重要な基準です。このメソッドは、UP 樹脂中の他の揮発性芳香族炭化水素の同時測定にも使用できます。
耐薬品性の高いUP樹脂には適用できません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 472 で指定されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4901 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 12, Thermosetting materials.
This second edition cancels and replaces the first edition (ISO 4901:1985), which has been technically revised (for details, see the Introduction).
Introduction
During the 25 years since publication of the first edition of this International Standard, ISO 4901:1985, significant advances have been made in analytical techniques such as gas chromatography. The standard has therefore been completely revised. The following are the main changes which have been made:
- a) In addition to a gas-chromatographic method, the first edition of ISO 4901 included, as an alternative, a classical method, Wijs' method, based on an iodometric titration. This method had been included in the first edition for laboratories in which gas chromatography was not available. As, nowadays, chromatography is considered to be a routine analytical tool, Wijs' method has been removed from the standard.
- b) Packed gas-chromatography columns have generally been replaced by open, tubular columns which operate under completely different conditions. In the revised test method, therefore, only an open, tubular column is used.
- c) In addition, the gas-chromatographic method has been extended to cover not only styrene but also other aromatic hydrocarbons which might have been used as solvents or starting materials in producing the unsaturated polyester resin.
WARNING — Persons using this document should be familiar with normal laboratory practice, if applicable. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory requirements.
1 Scope
This International Standard specifies a method for the determination, by gas chromatography, of the residual styrene monomer in reinforced plastics based on unsaturated polyester (UP) resins in the polymerized state. The residual styrene monomer content is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The method can also be used for the simultaneous determination of other volatile aromatic hydrocarbons in UP resins.
The method is not applicable to UP resins of high chemical resistance.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 472, Plastics — Vocabulary
- ISO 1172, Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 472 apply.