※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 518 は、技術委員会 ISO/TC 42, Photographyによって作成されました。
この第 2 版は、表 1 と図 1 が技術的に改訂された第 1 版 (ISO 518:1977) を取り消して置き換えるものです。
1 スコープ
この国際規格は、写真フラッシュ ランプおよび電子写真フラッシュ ユニット用の、電気接点の有無にかかわらず、カメラ アクセサリ シューの寸法を指定します。図 1 と図 2 に示されている寸法は、ソリッド シューズの基本的な寸法です。アクセサリーシューに、アクセサリーフットをしっかりと保持するため、または電気的接触を良好に保つためのスプリングまたはその他のデバイスが装備されている場合、シューの寸法は、それらの互換性および機能に影響を与えない範囲内で変更できます。
参考文献
| [1] | ISO 1101:2004, Geometrical Product Specifications (GPS) — 幾何公差 — 形状、方向、位置、振れの公差 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 518 was prepared by Technical Committee ISO/TC 42, Photography.
This second edition cancels and replaces the first edition (ISO 518:1977), of which Table 1 and Figure 1 have been technically revised.
1 Scope
This International Standard specifies the dimensions of camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units. The dimensions given in Figures 1 and 2 are basic for the solid shoe. When an accessory shoe is equipped with springs or other devices for holding the accessory foot tightly or maintaining good electrical contact, the dimensions of the shoe can be changed within the range in which their interchangeability and functions will not be affected.
Bibliography
| [1] | ISO 1101:2004, Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |