※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、国際規格と密接に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 5429 は、技術委員会 ISO/TC 29, 小工具、小委員会 SC小委員会 SC 5, 砥石および研磨剤によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 5429:2005) を取り消して置き換えるものです。
ISO 5429:2005 からの重要な変更点は次のとおりです。
- a)追加の寸法が含まれています。つまり、表 1 では、フラップ ホイールの追加の幅が追加されています。
- b)表 1 は、ISO 3919 に準拠するように編集上改訂されました。
1 スコープ
この国際規格は、定置式研削盤で使用するための組み込みフランジまたは別個のフランジを備えたフラップホイールの公称寸法と限界偏差を指定しています。
参考文献
| [1] | ISO 3919, コーティングされた研磨材 ― シャフト付きフラップホイール |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International fInternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5429 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SCSubcommittee SC 5, Grinding wheels and abrasives.
This third edition cancels and replaces the second edition (ISO 5429:2005), which has been technically revised.
Significant changes from ISO 5429:2005 are as follows:
- a) further dimensions have been included, i.e. in Table 1 additional widths of the flap wheel have been added;
- b) Table 1 has been editorially revised to be in line with ISO 3919.
1 Scope
This International Standard specifies the nominal dimensions and limit deviations of flap wheels with incorporated flanges or separate flanges for use on stationary grinding machines.
Bibliography
| [1] | ISO 3919, Coated abrasives ― Flap wheels with shaft |