※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 548 は、技術委員会 ISO/TC 65, マンガンおよびクロム鉱石によって開発されました。
この第 2 版は、ISO の技術業務に関する指令のPart 1 の 5.10.1 節に従って、ISO 理事会に直接提出されました。これは、以下の国のメンバー団体によって承認されていた初版 (つまり、ISO 548-1975) を取り消して置き換えます。
| オーストラリア | ハンガリー | ルーマニア |
| オーストリア | インド | 南アフリカ共和国 |
| チリ | イラン | スペイン |
| チェコスロバキア | アイルランド | イギリス |
| エジプト、アラブ共和国 | イタリア | ソビエト連邦 |
| フランス | 日本 | ユーゴスラビア |
| ドイツ、フランス | ポーランド |
この文書の不承認を表明した加盟団体はありませんでした。
1 適用範囲と適用分野
この国際規格は、マンガン鉱石の酸化バリウム含有量を測定するための硫酸バリウム重量法を規定しています。
この国際規格は、ISO 4297 と併せて読む必要があります。
2 参考文献
- ISO 4296/1, マンガン鉱石のサンプリング — 1: インクリメンタル サンプリング。 1)
- ISO 4296/2, マンガン鉱 — サンプリング — 2: サンプルの準備。 1)
- ISO 4297, マンガン鉱石および濃縮物 — 化学分析の方法 — 一般的な指示。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 548 was developed by Technical Committee ISO/TC 65, Manganese and chromium ores.
This second edition was submitted directly to the ISO Council, in accordance with clause 5.10.1 of part 1 of the Directives for the technical work of ISO. It cancels and replaces the first edition (i.e. ISO 548-1975), which had been approved by the member bodies of the following countries:
| Australia | Hungary | Romania |
| Austria | India | South Africa, Rep. of |
| Chile | Iran | Spain |
| Czechoslovakia | Ireland | United Kingdom |
| Egypt, Arab Rep. of | Italy | USSR |
| France | Japan | Yugoslavia |
| Germany, F. R. | Poland |
No member body had expressed disapproval of the document.
1 Scope and field of application
This International Standard specifies a barium sulphate gravimetric method for the determination of the barium oxide content of manganese ores.
This International Standard should be read in conjunction with ISO 4297.
2 References
- ISO 4296/1, Manganese ores Sampling — 1: Increment sampling.1)
- ISO 4296/2, Manganese ores — Sampling — 2: Preparation of samples.1)
- ISO 4297, Manganese ores and concentrates — Methods of chemical analysis — General instructions.