※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 54 は、 Gears の技術委員会 ISO/TC 60 によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 54:1977) を取り消して置き換えるものです。
1 スコープ
この国際規格は、一般工学用および重工業用の直歯車およびはすば歯車の標準モジュールの値を規定しています。
この国際規格は、自動車分野で使用される歯車には適用されません。
2 定義
この国際規格の目的のために、次の定義が適用されます。
2.1
モジュール
数 π に対するピッチ (ミリメートルで表される) の商、または歯の数で表される基準直径 (ミリメートルで表される) の商。
注記 1通常のモジュールは、基本ラックの通常のセクションで定義されます1 )
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 54 was prepared by Technical Committee ISO/TC 60, Gears.
This second edition cancels and replaces the first edition (ISO 54:1977), which has been technically revised.
1 Scope
This International Standard specifies the values of normal modules for straight and helical gears for general engineering and for heavy engineering.
This International Standard is not applicable to gears used in the automotive field.
2 Definition
For the purposes of this International Standard the following definition applies.
2.1
module
Quotient of the pitch, expressed in millimetres, to the number π or the quotient of the reference diameter, expressed in millimetres, by the number of teeth.
Note 1 to entry: The normal module is defined in the normal section of the basic rack 1 ).