※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 45 技術委員会、ゴムおよびゴム製品、小委員会 SC 2, 試験および分析によって作成されました。
この第 5 版は、第 4 版 (ISO 5600:2011) を取り消し、置き換えるものであり、第 2 条の基準参照を更新するためのマイナー改訂となります。
警告 1この文書を使用する人は、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、国の規制条件を確実に遵守することはユーザーの責任です。
警告 2この文書で指定されている特定の手順には、局所的な環境危険を引き起こす可能性のある物質の使用または生成、または廃棄物の生成が含まれる場合があります。使用後の安全な取り扱いと廃棄については、適切な文書を参照する必要があります。
1 スコープ
この文書は、硬い材料に対するゴム配合物の静的加硫接着強度を測定する方法を規定しています。試験片は、ゴム製のシリンダーで結合された剛性材料の 2 つの円錐形の端で構成されています。
接着力は、硬質材料とゴム配合物だけでなく、薄い合金コーティングや硬質部品の化学処理、単一セメントまたはプライマーとカバーセメントの両方などの他の要素を含む接着システムによって得られます。試験片を準備するための接着システムはユーザーが適切に指定する必要がありますが、この文書では、複雑な接着システムに関連するさまざまなタイプの故障の評価について規定されています。
この方法は主に、接着システムとその構成要素 (セメントや特殊ゴム配合物など)、および製造方法の開発と制御のためのデータを提供するために、標準条件下で実験室で作成された試験片を対象に設計されています。ゴムが剛性の支持部品に接着されてwhere 適用することを目的としていますが、ゴムが剛性の支持部品に接着されているwhere のように、高弾性材料であっても、横方向の寸法が小さいために支持体の剛性が低い場合はカバーできない場合があります。金属線、コード、または薄いシート。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5893:2002, ゴムおよびプラスチック試験装置 — 引張、曲げおよび圧縮タイプ (一定速度の移動) — 仕様
- ISO 18899:2013, ゴム — 試験装置の校正ガイド
- ISO 23529, ゴム — 物理試験法用の試験片を準備および調整するための一般手順
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis.
This fifth edition cancels and replaces the fourth edition (ISO 5600:2011), of which it constitutes a minor revision to update the normative references in Clause 2.
WARNING 1 Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
WARNING 2 Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.
1 Scope
This document specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical treatments of rigid parts and either a single cement or both primer and cover cements. The bonding system for preparing the test pieces should be adequately specified by the user, but provision is made in this document for the evaluation of different types of failure related to a complex bonding system.
The method is designed primarily for test pieces prepared in the laboratory under standard conditions in order to provide data for development and control of bonding systems and their components, such as cements or special rubber compounds, and of methods of manufacture. While intended to be applied where the rubber is bonded to rigid supporting pieces, it might not cover such cases where the support, although of high-modulus material, has a low rigidity due to small transverse dimensions, as in the case of rubber bonded to metal wires, cords or thin sheets.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5893:2002, Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
- ISO 18899:2013, Rubber — Guide to the calibration of test equipment
- ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: