※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 567 は、技術委員会 ISO/TC 27, 固体鉱物燃料、小委員会 SC 3, コークスによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 567:1974) を取り消して置き換えるものです。
序章
コークスのかさ密度は、その物理的特性、例えば見かけの相対密度、コークス粒子の形状とサイズ、および容器の寸法に依存します。この国際規格で指定されているコンテナの容量は 0.2 m 3です。大型容器内のコークスのかさ密度の測定は、ISO 1013 に記載されています。
1 スコープ
この国際規格は、容量 0.2 m 3の立方体容器内のコークスのかさ密度の測定方法を規定しています。公称トップサイズが125mm以下のコークスに適用されます。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 579:1981, コークス — 全水分含有量の測定。
- ISO 1013:1995, コーク — 大型容器のかさ密度の測定。
3 定義
この国際規格の目的のために、次の定義が適用されます。
3.1
かさ密度
固体鉱物燃料の一部の質量を、指定された条件下でその部分によって満たされた容器の体積で割ったもの。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 567 was prepared by Technical Committee ISO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke.
This second edition cancels and replaces the first edition (ISO 567:1974), which has been technically revised.
Introduction
The bulk density of coke depends upon its physical characteristics, e.g. apparent relative density, shape and size of the coke particles, and upon the dimensions of the container. The container specified in this International Standard has a capacity of 0,2 m3. The determination of bulk density of coke in a large container is described in ISO 1013.
1 Scope
This International Standard specifies a method for the determination of the bulk density of coke in a cubical container of capacity 0,2 m3. It is applicable to coke with a nominal top size not greater than 125 mm.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 579:1981, Coke — Determination of total moisture content.
- ISO 1013:1995, Coke — Determination of bulk density in a large container.
3 Definition
For the purposes of this International Standard, the following definition applies.
3.1
bulk density
The mass of a portion of a solid mineral fuel divided by the volume of the container which is filled by that portion under specified conditions.