この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 5707 は、ISO/TC 23 技術委員会「農業および林業用トラクターおよび機械」によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 5707:1996) および ISO 5707:1996/Cor.1:1997 を廃止し、置き換えます。
導入
この国際規格は、搾乳機設置の最小仕様に対する世界的な需要に応えて開発されました。動物用の搾乳機の構造と性能に対する基本的な要件は、動物の生理機能と、高い衛生状態と乳品質の基準の必要性によって決まります。
1 スコープ
この国際規格は、搾乳と洗浄のための搾乳機が満足に機能するための最低限の性能要件と情報要件、および特定の寸法要件を指定します。また、材料、設計、製造、設置に関する最小要件も指定します。
この国際規格は、牛、水牛、羊、ヤギの搾乳機に適用されwhere 真空による脈動で動物の搾乳が行われ、牛乳の少なくとも一部は空気流の助けをwhere て輸送されます。一部の条項は、すべてのタイプの搾乳機に適用されるわけではありません。定性的要件は、牛乳生産に使用される他の哺乳動物の搾乳施設にも適用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3918:2007, 搾乳機の設置 — 語彙
- ISO 4288, 幾何製品仕様書 (GPS) — 表面性状: プロファイル法 — 表面性状の評価のための規則と手順
- ISO 6690:2007, 搾乳機の設置 - 機械試験
- ISO 12100-1, 機械の安全性 — 基本概念、設計の一般原則 — Part 1: 基本用語、方法論
- ISO 12100-2, 機械の安全性 — 基本概念、設計の一般原則 — Part 2 部: 技術原則
- ISO 14159, 機械の安全性 — 機械設計の衛生要件
- IEC 60335-2-70, 家庭用および同様の電気機器 - 安全性 - Part 2-70: 搾乳機の特定要件
3 用語と定義
この文書の目的には、ISO 3918 で与えられる用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5707 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry.
This third edition cancels and replaces the second edition (ISO 5707:1996) as well as ISO 5707:1996/Cor.1:1997, which have been technically revised.
Introduction
This International Standard has been developed in response to worldwide demand for minimum specifications for milking machine installations. The basic requirements for the construction and performance of milking machines for animals are determined by the physiology of the animal and the need for a standard of high hygiene and milk quality.
1 Scope
This International Standard specifies the minimum performance and information requirements and certain dimensional requirements for satisfactory functioning of milking machines for milking and cleaning. It also specifies minimum requirements for materials, design, manufacture and installation.
This International Standard is applicable to milking machines for milking cows, water buffaloes, sheep and goats where animals are milked with pulsation created by vacuum, and where milk is, at least partly, transported with the help of airflow. Some clauses are not applicable to all types of milking machines. The qualitative requirements also apply to installations for milking other mammals used for milk production.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3918:2007, Milking machine installations — Vocabulary
- ISO 4288, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
- ISO 6690:2007, Milking machine installations — Mechanical tests
- ISO 12100-1, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology
- ISO 12100-2, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles
- ISO 14159, Safety of machinery — Hygiene requirements for the design of machinery
- IEC 60335-2-70, Household and similar electrical appliances — Safety — Part 2-70: Particular requirements for milking machines
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 3918 apply.