※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 570 は ISO/TC 72 技術委員会「繊維機械および関連機械および付属品」によって開発され、1981 年 8 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | スペイン |
| ベルギー | インド | スイス |
| ブラジル | 日本 | 七面鳥 |
| ブルガリア | 韓国 | イギリス |
| 中国 | メキシコ | ソビエト連邦 |
| チェコスロバキア | ポーランド | ユーゴスラビア |
| エジプト、アラブ共和国 | ルーマニア | |
| フランス | 南アフリカ共和国 |
この文書に反対を表明した加盟団体はなかった。
この国際規格は、技術改訂版である ISO 勧告 R 570-1967 を廃止し、置き換えるものです。
1 適用範囲と適用分野
この国際規格は、閉じた「0」型のエンドループを備えたヘルド用のヘルド支持ロッドの主な寸法と調整を指定します。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 570 was developed by Technical Committee ISO/TC 72, Textile machinery and allied machinery and accessories, and was circulated to the member bodies in August 1981.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F.R. | Spain |
| Belgium | India | Switzerland |
| Brazil | Japan | Turkey |
| Bulgaria | Korea, Rep. of | United Kingdom |
| China | Mexico | USSR |
| Czechoslovakia | Poland | Yugoslavia |
| Egypt, Arab Rep. of | Romania | |
| France | South Africa, Rep. of |
No member body expressed disapproval of the document.
This International Standard cancels and replaces ISO Recommendation R 570-1967, of which it constitutes a technical revision.
1 Scope and field of application
This International Standard specifies the main dimensions and the co-ordination of heald carrying rods for healds with closed"0"-shaped end loops.
2 References
- ISO 363, Textile machinery and accessories — Flat steel healds for general use — Dimensions.
- ISO 364, Textile machinery and accessories — Twin wire healds for weaving machines. 1)