※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 5734 は、技術委員会 ISO/TC 39, 工作機械によって作成されました。
この第 2 版は、幾何学的試験 G4, G5, および G6 が技術的に改訂された第 1 版 (ISO 5734-1978) を取り消して置き換えます。
ユーザーは、すべての国際規格が随時改訂されること、および他の国際規格への参照は、別段の記載がない限り、その最新版を意味することに注意する必要があります。
1 適用範囲と適用分野
この国際規格は、ISO 230/1 を参照して、工作機械で使用する汎用および通常の精度の機械的分割ヘッドの幾何学的試験、および適用される対応する許容偏差を指定します。
デバイスの精度の検証のみを扱います。デバイスの実行には適用されません。通常、精度をテストする前に確認する必要があります。
2 参照
ISO 230/1, 工作機械の受け入れコード— Part 1:無負荷または仕上げ条件で動作する機械の幾何学的精度。
Foreword
ISO{the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 5734 was prepared by Technical Committee ISO/TC 39, Machine tools.
This second edition cancels and replaces the first edition (ISO 5734-1978), the geometrical tests G4, G5 and G6 of which have been technically revised.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies, with reference to ISO 230/1, geometrical tests on general purpose and normal accuracy mechanical dividing heads for use on machine tools, and the corresponding permissible deviations that apply.
It deals only with the verification of the accuracy of the device. It does not apply to the running of the device, which should generally be checked before the accuracy is tested.
2 Reference
ISO 230/1, Acceptance code for machine tools — Part 1:Geometric accuracy of machines operating under no-load orfinishing conditions.