※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 5768 は、ISO/TC 36, 映画撮影技術委員会によって作成されました。
この第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 5768:1996) を廃止し、置き換えます。表 1 では、基準寸法C から公差が削除されています。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、画像アスペクト比が 1.66:1 以上の非アナモルフィック 35 mm 映画フィルムへの引き伸ばしを目的とした 16 mm 映画フィルム上のカメラ アパーチャType W によって生成される画像領域の寸法と位置を指定します。 。
この国際規格は、35 mm インターネガまたは複製ネガ上の対応する画像領域の寸法と位置、および 16 mm Type W 原稿からの光学プリントでの拡大率も指定します。
参考文献
| 1 | ISO 25:1994, 映画撮影 — 16 mm 映画フィルムのカメラ使用 — 仕様。 |
| 2 | ISO 69:1998, 映画撮影 — 16 mm 映画および磁気フィルム — 切断および穿孔の寸法。 |
| 3 | ISO 466:1976, 映画撮影 — 16 mm 映画カメラの絞りによって生成された画像 — 位置と寸法。 |
| 4 | ISO 2907:1984, 映画撮影法 — 35 mm 映画フィルム上の最大投影可能画像領域 — 位置と寸法。 |
| 5 | ISO 2939:1986, 映画撮影 — 35 mm 映画リリース プリント上の画像領域と写真サウンド記録 — 位置と寸法。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 5768 was prepared by Technical Committee ISO/TC 36, Cinematography.
This third edition cancels and replaces the second edition (ISO 5768:1996), of which it constitutes a minor revision. In table 1, the tolerances have been removed from reference dimension C.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the dimensions and location of the image area produced by the camera aperture Type W on 16 mm motion-picture film intended for enlargement to non-anamorphic 35 mm motion-picture film with an image aspect ratio of 1,66:1 or greater.
This International Standard also specifies the dimensions and location of the corresponding image area on a 35 mm internegative or duplicate negative and the enlargement ratio in optical printing from 16 mm Type W originals.
Bibliography
| 1 | ISO 25:1994, Cinematography — Camera usage of 16 mm motion-picture film — Specifications. |
| 2 | ISO 69:1998, Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions. |
| 3 | ISO 466:1976, Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions. |
| 4 | ISO 2907:1984, Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions. |
| 5 | ISO 2939:1986, Cinematography — Picture image area and photographic sound record on 35 mm motion-picture release prints — Position and dimensions. |