※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 5821 は、技術委員会 ISO/TC 44, 溶接および関連プロセス、小委員会 SC 6, 抵抗溶接および関連機械的接合によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 5821:1979) を取り消して置き換えるものです。
この国際規格のあらゆる側面の公式な解釈の要求は、あなたの国の規格団体を通じて ISO/TC 44/SC 6 の事務局に送信する必要があります。その完全なリストは、www.iso.org で見つけることができます。
1 スコープ
この国際規格は、抵抗スポット溶接電極キャップの寸法と公差を規定しています。ここで, キャップを電極アダプターに固定するためにメス型テーパー (ISO 1089 を参照) が使用されます (ISO 5183-1 および ISO 5183-2 を参照)
これは、表 2 および表 A.2 の直径d 1に対して与えられた電極力F E を超えない電極キャップにのみ適用されます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1089, スポット溶接装置用電極テーパー フィット - 寸法
- ISO 5182, 抵抗溶接 - 電極および付属機器の材料
- ISO 5183-1, 抵抗溶接装置 — 電極アダプター、オス テーパー 1:10 — Part 1: コニカル固定、テーパー 1:10
- ISO 5183-2, 抵抗溶接装置 — 電極アダプター、オス テーパー 1:10 — Part 2: エンドスラスト電極用平行シャンク固定
- ISO 17677-1, 抵抗溶接 — 語彙 — Part 1: スポット、プロジェクション、シーム溶接
3 用語と定義
このドキュメントの目的のために、ISO 17677-1 に記載されている用語と定義が適用されます。
参考文献
| 1 | ISO 286-2, 限界とはめあいの ISO システム — Part 2: 穴とシャフトの標準公差等級と限界偏差の表 |
| 2 | ISO 1119, Geometrical Product Specifications (GPS) — 一連の円錐テーパーおよびテーパー角度 |
| 3 | ISO 5822, スポット溶接装置 — テーパー プラグ ゲージおよびテーパー リング ゲージ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5821 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding and allied mechanical joining.
This second edition cancels and replaces the first edition (ISO 5821:1979) which has been technically revised.
Requests for official interpretations of any aspect of this International Standard should be directed to the Secretariat of ISO/TC 44/SC 6 via your national standards body, a complete listing of which can be found at www.iso.org.
1 Scope
This International Standard specifies the dimensions and tolerances of resistance spot welding electrode caps ここで, a female taper (see ISO 1089) is used to fix the cap to an electrode adaptor (see ISO 5183-1 and ISO 5183-2).
It applies only to electrode caps for which the electrode force, FE, given for diameter d1 in Table 2 and Table A.2 is not exceeded.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1089, Electrode taper fits for spot welding equipment — Dimensions
- ISO 5182, Resistance welding — Materials for electrodes and ancillary equipment
- ISO 5183-1, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
- ISO 5183-2, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
- ISO 17677-1, Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 17677-1 apply.
Bibliography
| 1 | ISO 286-2, ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts |
| 2 | ISO 1119, Geometrical Product Specifications (GPS) — Series of conical tapers and taper angles |
| 3 | ISO 5822, Spot welding equipment — Taper plug gauges and taper ring gauges |