※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 5829 は、技術委員会 ISO/TC 44, 溶接および関連プロセスによって作成されました。
1 適用範囲と適用分野
この国際規格は、キャップの固定要素がメス型テーパー (オス型電極キャップ、ISO 5830 を参照) であり、電極テーパーが ISO 1089 に適合する抵抗スポット溶接電極アダプターの寸法と公差を指定します。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 5829 was prepared by Technical Committee ISO/TC 44, Welding and allied processes.
1 Scope and field of application
This International Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a female taper (male electrode cap, see ISO 5830) and for which the electrode taper fits conform to ISO 1089.
2 References
- ISO 1089, Electrode taper fits for spot welding equipment — Dimensions.
- ISO 1302, Technical drawings — Method of indicating surface texture on drawings.
- ISO 5182, Materials for resistance welding electrodes and ancillary equipment.
- ISO 5830, Resistance spot welding male electrode caps.