この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 5978 は、技術委員会 ISO/TC 45, ゴムおよびゴム製品によって作成されました。
この第 2 版は、第 1 版 (ISO 5978:1979) を取り消し、置き換えます。これは、マイナーな技術改訂を構成します。
序章
高温でのブロッキング試験は、ゴムまたはプラスチックでコーティングされた生地のブロッキングに対する相対的な耐性を推定するために設計されています。この目的のために、コーティングされた生地は、特定の温度で特定の領域に特定の負荷がかけられます。
1 スコープ
この国際規格は、ゴムまたはプラスチックでコーティングされた布地のブロッキングに対する耐性を決定する方法を指定しています。
指定された方法は、ほとんどの場合に受け入れられます。指定されたもの以外の条件を使用することが望まれる場合、これらは契約当事者間で相互に合意することができますが、そのような変更は試験報告書に記載するものとします。
3 定義
この国際規格の目的のために、次の定義が適用されます。
ブロッキング
材料間の意図しない付着。
[出典: ISO 472:1988, プラスチック - 語彙からの定義。]
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75% approval by the member bodies voting.
International Standard ISO 5978 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products.
This second edition cancels and replaces the first edition (ISO 5978:1979), of which it constitutes a minor technical revision.
Introduction
Blocking tests at elevated temperatures are designed to estimate the relative resistance of rubber- or plastics-coated fabrics to blocking. For this purpose, the coated fabric is subjected to a specified load over a defined area at a specific temperature.
1 Scope
This International Standard specifies a method for the determination of the resistance of rubber- or plastics-coated fabrics to blocking.
The method specified is acceptable in most cases. If it is desired to use conditions other than those specified, these may be mutually agreed between the contracting parties but such variations shall be stated in the test report.
3 Definition
For the purposes of this International Standard, the following definition applies.
blocking
An unintentional adherence between materials.
[SOURCE: Definition taken from ISO 472:1988, Plastics — Vocabulary.]