ISO 6020-2:2015 油圧作動油パワー—シングルロッドシリンダーの取り付け寸法、16 MPa（160 bar）シリーズ—パート2：コンパクトシリーズ | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.

This fourth edition cancels and replaces the third edition (ISO 6020-2:2006), which has been technically revised to incorporate Technical Corrigendum 1, published 2008-10-15.

ISO 6020 consists of the following parts, under the general title Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series:

• Part 1: Medium series
• Part 2: Compact series
• Part 3: Compact series with bores from 250 mm to 500 mm

Introduction

In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit.

One component of such systems is the cylinder. This is a device that converts fluid power into linear mechanical force and motion. It consists of a moveable element, i.e. a piston and piston rod, operating within a cylindrical bore.

1 Scope

This part of ISO 6020 establishes metric mounting dimensions for compact series cylinders, 16 MPa [160 bar ¹ ], as required for interchangeability of commonly-used hydraulic cylinders.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 5598 apply.

Bibliography