※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6036 は、ISO/TC 36 の映画撮影技術委員会によって作成されました。
この国際規格の附属書 A および附属書 В は情報提供のみを目的としています。
1 スコープ
この国際規格は、テレビ送信を目的としたカラー 16 mm および 35 mm 映画プリントおよびスライドの主要濃度値を指定します。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 5-2:1991, 写真 - 密度測定 - Part 2: 透過密度の幾何学的条件。
- ISO 5-3:1995, 写真 - 濃度測定 - Part 3: スペクトル条件。
付録B
参考文献
| 1 | ISO 2910:1990, 映画撮影法 — 屋内劇場での映画フィルムの投影のスクリーン輝度。 |
| 2 | ISO 6035:1983, 映画撮影 - テレビ用フィルムおよびスライドの評価のための観察条件 - 色、輝度、および寸法。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
international Standard ISO 6036 was prepared by Technical Committee ISO/TC 36, Cinematography.
Annexes A and В of this International Standard are for information only.
1 Scope
This International Standard specifies principal density values for colour 16 mm and 35 mm motion-picture prints and slides intended for television transmission.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 5-2:1991, Photography — Density measurements — Part 2: Geometric conditions for transmission density.
- ISO 5-3:1995, Photography — Density measurements — Part 3: Spectral conditions.
Annex В
Bibliography
| 1 | ISO 2910:1990, Cinematography — Screen luminance for the projection of motion-picture films in indoor theatres. |
| 2 | ISO 6035:1983, Cinematography — Viewing conditions for the evaluation of films and slides for television — Colours, luminances and dimensions. |