※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 6098 は、技術委員会 ISO/TC 97, 情報処理システムによって作成されました。
ISO 6098 は 1982 年に最初に発行されました。前版のサブ条項 5.1 が技術的に改訂されました。
1 適用範囲と適用分野
この国際規格は、ISO 1864 で指定された 12.7 mm (0.5 インチ) 幅の磁気テープのリールで使用される自己装填式カートリッジの機械的および機能的な互換性の要件を指定します。
セルフローディング操作用に設計されたテープ ドライブ間でカートリッジの互換性を確保するために、カートリッジの最小寸法および機能要件が規定されています。互換性のために厳密に必要なもの以外のいくつかの寸法と機能も示されていますが、推奨またはオプションとして考慮する必要があります。
注 -この国際規格の SI およびインペリアル測定システムの数値は丸められている可能性があり、したがって、互いに一貫性がありますが、正確に等しいわけではありません。混合も変換もされません。元の設計は、帝国測定システムを使用して完成しました。
2 参照
- ISO 1864, 情報処理 — 情報交換用の記録されていない幅 12.7 m, NRZ
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 6098 was prepared by Technical Committee ISO/TC 97, Information processing systems.
ISO 6098 was first published in 1982. This second edition cancels and replaces the first edition; sub-clause 5.1 of the previous edition having been technically revised.
1 Scope and field of application
This International Standard specifies mechanical and functional interchangeability requirements for self-loading cartridges, to be used with reels of 12,7 mm (0.5 in) wide magnetic tape specified in ISO 1864.
Minimum dimensional and functional requirements of the cartridge are given, in order to ensure interchangeability of cartridges between tape drives designed for self-loading operation. Some dimensions and features, other than those strictly required for interchangeability, are also given but have to be considered as recommended or optional.
NOTE — The numeric values in the SI and Imperial measurement systems in this International Standard may have been rounded and, therefore, are consistent with, but not exactly equal to, each other, Either system may be used but the two should be neither intermixed nor reconverted. The original design was completed using the Imperial measurement system.
2 Reference
- ISO 1864, Information processing — Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1.