※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 2, 試験および分析によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6101-6:2011) を廃止し、置き換えます。
前版との主な変更点は以下の通りです。
- 有機物の破壊手順はさらに詳しく説明されています。
- 8.5 の式 (2) は、1 キログラムあたりのミリグラムで表されるマグネシウム含有量に変更されました。
- 精度データは付録 B で更新されました。
ISO 6101 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
警告 1この文書を使用する人は、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、国内規制条件の適用性を判断するのはユーザーの責任です。
警告 2この文書で指定されている特定の手順には、局所的な環境危険を引き起こす可能性のある物質の使用または生成、または廃棄物の生成が含まれる場合があります。使用後の安全な取り扱いと廃棄については、適切な文書を参照する必要があります。
1 スコープ
この文書は、天然ゴムラテックス濃縮物、生の天然ゴム、および天然ゴムから作られた製品のマグネシウム含有量を測定するための原子吸光分析法を規定しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO および IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO/TR 9272, ゴムおよびゴム製品 — 試験方法規格の精度の決定 |
| 2 | ISO 19983, ゴム — 試験方法の精度の決定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis.
This second edition cancels and replaces the first edition (ISO 6101-6:2011), which has been technically revised.
The main changes compared to the previous edition are as follows:
- The procedure for the destruction of organic matter has been further detailed;
- Formula (2) in 8.5 has been changed to magnesium content expressed as milligram per kilogram;
- Precision data have been updated in Annex B.
A list of all parts in the ISO 6101 series can be found on the ISO website.
WARNING 1 Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine applicability of any national regulatory conditions.
WARNING 2 Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.
1 Scope
This document specifies an atomic absorption spectrometric method for the determination of the magnesium content of natural rubber latex concentrate, raw natural rubber and products made from natural rubber.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 123, Rubber latex — Sampling
- ISO 124, Latex, rubber — Determination of total solids content
- ISO 247-1, Rubber — Determination of ash — Part 1: Dry combustion technique
- ISO 648, Laboratory glassware — Single-volume pipettes
- ISO 835, Laboratory glassware — Graduated pipettes
- ISO 1042, Laboratory glassware — One-mark volumetric flasks
- ISO 1772, Laboratory crucibles in porcelain and silica
- ISO 1795, Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological database for use in standardization at the following address:
Bibliography
| 1 | ISO/TR 9272, Rubber and rubber products — Determination of precision for test method standards |
| 2 | ISO 19983, Rubber — Determination of precision of test methods |