※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 21, 防火および消火のための設備、小委員会 SC 5, 水を使用する固定消火システムによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6182-4:1993) を廃止し、置き換えます。
ISO 6182 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、1 つまたは複数のスプリンクラーが作動するときにバルブの動作を促進するために、防火システムの乾式パイプ バルブとともに使用される加速器の性能およびテスト要件を指定します。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
アクセル
設置配管の圧力を下げる以外の機械的手段を使用して、乾式管バルブの動作を早める急速開閉装置
注記 1:この文書の目的上、アクセラレータという用語は、アクセラレータおよび任意の (内部または外部) フラッディング防止装置を指します (3.2) 。
3.2
浸水防止装置
過剰な水やその他の異物がアクセルの関連部分に侵入し、 where の動作が妨げられることを防ぐことを目的とした装置
3.3
耐食性材料
青銅、真鍮、銅ニッケル合金金属、オーステナイト系ステンレス鋼、または同等の金属材料、またはこの文書の要件に適合するプラスチック材料
3.4
定格使用圧力
加速器が動作することを意図した最大使用圧力
3.5
サービスプレッシャー
アクセルと乾式パイプバルブが準備完了状態にあるときの、乾式パイプバルブへの入口における静水圧
3.6
保持室
システム空気圧で加圧されたチャンバーは、システム空気圧の十分な損失率で加速作用を発揮します。
参考文献
| 1 | ISO 7-1, ねじwhere 気密接合が行われる管ねじ - Part 1: 寸法、公差、および指定 |
| 2 | ISO 37, ゴム、加硫または熱可塑性プラスチック — 引張応力-ひずみ特性の決定 |
| 3 | ISO 188, ゴム、加硫または熱可塑性 — 加速老化および耐熱性テスト |
| 4 | ISO 6182-1, 防火 — 自動スプリンクラー システム — Part 1: スプリンクラーの要件とテスト方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire fighting, Subcommittee SC 5, Fixed firefighting systems using water.
This second edition cancels and replaces the first edition (ISO 6182-4:1993), which has been technically revised.
A list of all the parts in the ISO 6182 series, can be found on the ISO website.
1 Scope
This document specifies the performance and testing requirements for accelerators used with dry pipe valves in fire protection systems to hasten the operation of the valves when one or more sprinklers operate.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 49, Malleable cast iron fittings threaded to ISO 7-1
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
accelerator
quick-opening device which hastens the operation of a dry pipe valve using mechanical means other than by reducing installation pipework pressure
Note 1 to entry: For the purposes of this document, the term accelerator refers to an accelerator and any (internal or external) antiflooding device (3.2) .
3.2
antiflooding device
device intended to prohibit excessive water or other foreign matter from entering any relevant part or parts of the accelerator where this might prevent subsequent operation
3.3
corrosion-resistant material
metallic material of bronze, brass, copper-nickel alloys metal, austenitic stainless steel, or equivalent, or plastic material conforming with the requirements of this document
3.4
rated working pressures
maximum service pressure at which an accelerator is intended to operate
3.5
service pressure
static water pressure at the inlet to a dry pipe valve when the accelerator and the dry pipe valve are in the ready condition
3.6
holding chamber
chamber pressurized with system air pressure which actuates an accelerator upon a sufficient rate of loss of system air pressure
Bibliography
| 1 | ISO 7-1, Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| 2 | ISO 37, Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| 3 | ISO 188, Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| 4 | ISO 6182-1, Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers |