この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 6194-3 は、技術委員会 ISO/TC 131, 流体動力システム、小委員会 SC 7, シーリング装置によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6194-3:1988) を廃止し、置き換えます。
ISO 6194 は、エラストマー シール要素を組み込んだロータリー シャフト リップ型シールという一般タイトルの下、次の部分で構成されています。
- Part 1: 呼び寸法と公差
- Part 2: 語彙
- Part 3: 保管、取り扱い、設置
- Part 4: パフォーマンス テスト手順
- Part 5: 視覚的欠陥の特定
導入
回転シャフトのリップタイプのシールは、差圧が比較的低い機器内where 潤滑剤などの流体を保持するために使用されます。通常、シャフトは回転し、ハウジングは静止しますが、用途によっては、シャフトが静止し、ハウジングが回転する場合もあります。
動的シールは通常、シャフトとシールに組み込まれた柔軟な要素との間の設計された締り嵌めの結果として得られます。
同様に、シールの外径とハウジングのボアの直径の間に設計された締り嵌めによってシールが保持され、静的漏れが防止されます。
取り付け前および取り付け中の両方で、耐用年数に悪影響を与える可能性のある危険を回避するには、すべてのシールを慎重に保管、取り扱い、適切に取り付ける必要があります。
1 スコープ
ISO 6194 のこの部分では、エラストマーシール要素を利用したシールについて説明しています。これらは低圧条件下での使用に適していると考えられています。 ISO 6194-1:2007, 6.1 を参照。
ISO 6194 のこの部分では、リップ型シールのユーザーに、回転軸リップ型シールの慎重な保管、取り扱い、適切な取り付けに関する要件とガイダンスを提供します。含まれる危険とそれを回避する方法に注意が向けられます。
注ISO 6194 (すべての部品) は、熱可塑性シール要素を組み込んだシールを対象とする ISO 16589 (すべての部品) を補完するものです。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2230, ゴム製品 — 保管に関するガイドライン
- ISO 5598, 流体力システムおよびコンポーネント — 語彙
- ISO 6194-1, エラストマーシール要素を組み込んだ回転シャフトリップタイプシール — Part 1: 公称寸法と公差
- ISO 6194-2, エラストマーシール要素を組み込んだ回転シャフトリップタイプシール - Part 2: 用語
3 用語と定義
この文書の目的のために、ISO 5598 および ISO 6194-2 で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 1658, 熱可塑性シール要素を組み込んだロータリー シャフト リップ タイプ シール |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6194-3 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 7, Sealing devices.
This second edition cancels and replaces the first edition (ISO 6194-3:1988), which has been technically revised.
ISO 6194 consists of the following parts, under the general title Rotary shaft lip-type seals incorporating elastomeric sealing elements:
- Part 1: Nominal dimensions and tolerances
- Part 2: Vocabulary
- Part 3: Storage, handling and installation
- Part 4: Performance test procedures
- Part 5: Identification of visual imperfections
Introduction
Rotary shaft lip-type seals are used to retain fluid, e.g. lubricant, in equipment where the differential pressure is relatively low. Typically, the shaft rotates and the housing is stationary although, in some applications, the shaft is stationary and the housing rotates.
Dynamic sealing is normally the result of a designed interference fit between the shaft and a flexible element incorporated in the seal.
Similarly, a designed interference fit between the outside diameter of the seal and the diameter of the housing bore retains the seal and prevents static leakage.
Careful storage, handling and proper installation of all seals are necessary to avoid hazards, both prior to and during installation, which can adversely affect service life.
1 Scope
This part of ISO 6194 describes seals utilizing elastomeric sealing elements. They are considered suitable for use under low-pressure conditions; see ISO 6194-1:2007, 6.1.
This part of ISO 6194 gives users of lip-type seals requirements and guidance on the careful storage, handling and proper installation of rotary shaft lip-type seals; attention is drawn to the hazards involved and ways of avoiding them.
NOTE ISO 6194 (all parts) is complementary to ISO 16589 (all parts), which covers seals incorporating thermoplastic sealing elements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2230, Rubber products — Guidelines for storage
- ISO 5598, Fluid power systems and components — Vocabulary
- ISO 6194-1, Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
- ISO 6194-2, Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 2: Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5598 and ISO 6194-2 apply.
Bibliography
| 1 | ISO 16589 (all parts), Rotary shaft lip-type seals incorporating thermoplastic sealing elements |