この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6200 は、技術委員会 ISO/TC 171, ドキュメント イメージング アプリケーション、小委員会 SC 1, 品質レベルおよび管理手順の定量化によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 6200:1990) を取り消して置き換えるものです。
序章
マイクロフォームは、含まれる情報が明確に判読でき、使用目的に適した品質のものでなければなりません。したがって、マイクロフィルム用のドキュメントがマイクロフィルムの基準に準拠していることが重要です。
マイクロイメージの密度を制御することで、良好な結果が得られます。
1 スコープ
この国際規格は、第 1 世代の銀ゼラチン マイクロフォームの密度を測定する方法を規定しています。ドキュメントのさまざまな品質の密度値を指定します。
これは、ソース ドキュメントのネガに見えるマイクロフォームに適用されます。
ISO 3272-2 で扱われる技術図面のマイクロフォーム、ISO 8126 で扱われるジアゾおよびベシキュラー フィルム、または ISO 8514 で扱われる COM マイクロフォームには適用されません。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 5-1:1984, 写真 — 濃度測定 — 1: 用語、記号および表記。
- ISO 5-2:1991, 写真 — 濃度測定 — 2: 透過密度の幾何学的条件。
- ISO 5-3:1995, 写真 - 濃度測定 - 3: スペクトル条件。
- ISO 6196-1:1993, 顕微鏡 — 語彙 — 1: 一般用語。
- ISO 6196-4:1998, 顕微鏡 — 語彙 — 4: 材料および包装。
- ISO 6196-5:1987, 顕微鏡 — 語彙 — 5: 画像の品質、読みやすさ、検査。
- ISO 6196-6:1992, 顕微鏡 — 語彙 — 6: 装備。
3 用語と定義
この国際規格の目的のために、ISO 5-1 および ISO 6196 に示されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 6200 was prepared by Technical Committee ISO/TC 171, Document imaging applications, Subcommittee SC 1, Quantification of quality levels and control procedures.
This third edition cancels and replaces the second edition (ISO 6200:1990) which has been technically revised.
Introduction
Microforms should be of such quality that the information contained is clearly legible, and suitable for its intended use. It is therefore important that documents for microfilming conform to microfilming criteria.
Controlling microimage density helps to ensure that good results are obtained.
1 Scope
This International Standard specifies a method for measuring densities of first generation silver-gelatin microforms. It specifies density values for different qualities of documents.
It applies to source document negative-appearing microforms.
It does not apply to microforms for technical drawings which are dealt with in ISO 3272-2, or to diazo and vesicular films which are the subject of ISO 8126, or to COM microforms which are dealt with in ISO 8514.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 5-1:1984, Photography — Density measurements — 1: Terms, symbols and notations.
- ISO 5-2:1991, Photography — Density measurements — 2: Geometric conditions for transmission density.
- ISO 5-3:1995, Photography — Density Measurements — 3: Spectral conditions.
- ISO 6196-1:1993, Micrographics — Vocabulary — 1: General terms.
- ISO 6196-4:1998, Micrographics — Vocabulary — 4: Materials and packaging.
- ISO 6196-5:1987, Micrographics — Vocabulary — 5: Quality of images, legibility, inspection.
- ISO 6196-6:1992, Micrographics — Vocabulary — 6: Equipment.
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in ISO 5-1 and ISO 6196 apply.