※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 6228 は、技術委員会 ISO/TC 47, 化学によって開発され、1978 年 11 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | ルーマニア |
| オーストリア | インド | 南アフリカ共和国 |
| ベルギー | イスラエル | スイス |
| ブルガリア | イタリア | 七面鳥 |
| 中国 | 大韓民国 | イギリス |
| チェコスロバキア | メキシコ | ソビエト連邦 |
| エジプト、アラブ共和国 | オランダ | ユーゴスラビア |
| フランス | ニュージーランド | |
| ドイツ、フランス | ポーランド |
この文書の不承認を表明した加盟団体はありませんでした。
この国際規格は、国際純正応用化学連合 (IUPAC) によっても承認されています。
1 スコープ
この国際規格は、工業用化学製品中の微量の硫酸塩化合物を硫酸塩として測定するための一般的な還元および滴定法を規定しています。
この方法が適用される化学製品に関する国際規格は、硫黄化合物を硫酸塩に変換するために試験片を処理する方法を、必要に応じて、一般的な手順の修正とともに指定するものとします。が必要になる場合があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 6228 was developed by Technical Committee ISO/TC 47, Chemistry, and was circulated to the member bodies in November 1978.
It has been approved by the member bodies of the following countries:
| Australia | Hungary | Romania |
| Austria | India | South Africa, Rep. of |
| Belgium | Israel | Switzerland |
| Bulgaria | Italy | Turkey |
| China | Korea, Rep. of | United Kingdom |
| Czechoslovakia | Mexico | USSR |
| Egypt, Arab Rep. of | Netherlands | Yugoslavia |
| France | New Zealand | |
| Germany, F. R. | Poland |
No member body expressed disapproval of the document.
This International Standard has also been approved by the International Union of Pure and Applied Chemistry (IUPAC).
1 Scope
This International Standard specifies a general reduction and titrimetric method for the determination, as sulphate, of trace quantities of sulphur compounds in chemical products for industrial use.
The International Standard relating to the chemical product to which the method is to be applied shall specify the method by which the test portion should be treated in order to convert the sulphur compounds to sulphate, if necessary, together with any modifications to the general procedure that may be needed.