※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6284 は、技術委員会 ISO/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 8, 建設文書によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6284:1985) を取り消して置き換えるものです。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、建築図面上で限界偏差を表示する方法を規定しています。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下にリストされている規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 286-1:1988, 限界と適合の ISO システム — 1: 公差、偏差、適合の基準。
- ISO 1803: —1) 、建築構造—寸法精度の表現—語彙。
- ISO 4068:1978, 建築および土木工学の図面 — 基準線。
- ISO 9431:1990, 建設図面 — 図面とテキストのスペース、および図面シートのタイトル ブロック。
3 つの定義
この国際規格の目的のために、ISO 286-1 および ISO 1803 で与えられた定義が適用されます。
附属書 A
参考文献
| [1] | ISO 129:1985, 技術図面 - 寸法 - 一般原則、定義、実行方法、および特別な表示。 |
| [2] | ISO 406:1987, 技術図面 - 直線寸法と角度寸法の公差。 |
| [3] | ISO 1101:1983, 技術図面 — 幾何公差 — 形状、方向、位置および振れの公差 — 一般性、定義、記号、図面の表示。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 6284 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 8, Construction documentation.
This second edition cancels and replaces the first edition (ISO 6284:1985), which has been technically revised.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies methods for the indication of limit deviations on construction drawings.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 286-1:1988, ISO system of limits and fits — 1: Bases of tolerances, deviations and fits.
- ISO 1803:— 1) , Building construction — Expression of dimensional accuracy — Vocabulary.
- ISO 4068:1978, Building and civil engineering drawings — Reference lines.
- ISO 9431:1990, Construction drawings — Spaces for drawing and for text, and title blocks on drawings sheets.
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 286-1 and ISO 1803 apply.
Annex A
Bibliography
| [1] | ISO 129:1985, Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications. |
| [2] | ISO 406:1987, Technical drawings — Tolerancing of linear and angular dimensions. |
| [3] | ISO 1101:1983, Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on drawings. |