※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が認可された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 6305/3 は、ISO/TC 17, 鉄鋼技術委員会によって開発され、1982 年 8 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | 南アフリカ共和国 |
| オーストリア | インド | スウェーデン |
| ベルギー | イラン | スイス |
| カナダ | 日本 | タンザニア |
| エジプト、アラブ共和国 | 韓国、民主党代表 | 七面鳥 |
| フランス | 韓国 | イギリス |
| ドイツ、フランス | ルーマニア | ソビエト連邦 |
この文書に反対を表明した加盟団体はなかった。
1 適用範囲と適用分野
ISO 6305 のこの部分では、製品の品質要件と鋼製まくらぎの受け入れ試験の条件が規定されています。製品が平板から製造される場合、代替の同等の仕様が購入者と製造者の間で合意される場合があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 6305/3 was developed by Technical Committee ISO/TC 17, Steel, and was circulated to the member bodies in August 1982.
It has been approved by the member bodies of the following countries:
| Australia | Hungary | South Africa, Rep. of |
| Austria | India | Sweden |
| Belgium | Iran | Switzerland |
| Canada | Japan | Tanzania |
| Egypt, Arab Rep. of | Korea, Dem. P. Rep. of | Turkey |
| France | Korea, Rep. of | United Kingdom |
| Germany, F. R. | Romania | USSR |
No member body expressed disapproval of the document.
1 Scope and field of application
This part of ISO 6305 specifies the quality requirements of the product and the conditions of acceptance testing for steel sleepers. When the products are to be manufactured from flat plates, an alternative but equivalent specification may be agreed between the purchaser and the manufacturer.
2 References
- ISO 82, Steel — Tensile testing.
- ISO 85, Bend test for steel.
- ISO 2859, Sampling procedures and tables for inspection by attributes.