※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 79, 軽金属およびその合金、小委員会 SC 6, 鍛造アルミニウムおよびアルミニウム合金です。
この第 4 版は、技術的に改訂された第 3 版 (ISO 6362-2:2012) を取り消し、置き換えます。
ISO 6362 は、一般的なタイトルである鍛造アルミニウムおよびアルミニウム合金 - 押出ロッド/バー、チューブおよびプロファイルの下の次の部分で構成されています。
- Part 1: 検査および納品の技術的条件
- Part 2: 機械的特性
- Part 3: 押し出し長方形バー - 形状と寸法の公差
- Part 4: プロファイル — 形状と寸法の公差
- Part 5: 丸棒、四角棒、六角棒 - 形状と寸法の公差
- Part 6: 丸、四角、長方形、および六角形のチューブ — 形状と寸法の公差
- Part 7: 化学組成
1 スコープ
ISO 6362 のこの部分は、一般的なエンジニアリング用途向けの鍛造アルミニウムおよびアルミニウム合金押出ロッド/バー、チューブ、およびプロファイルの機械的特性を指定しています。
押出製品に適用されます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6362-1, 鍛造アルミニウムおよびアルミニウム合金 — 押出ロッド/バー、チューブおよびプロファイル — 1: 検査および納品の技術的条件
- ISO 6892-1, 金属材料 — 引張試験 — 1: 室温での試験方法
- ASTM B557M, 鍛造および鋳造アルミニウムおよびマグネシウム合金製品の引張試験の標準試験方法
3 用語と定義
このドキュメントの目的のために、ISO 6362-1 に記載されている用語と定義が適用されます。
参考文献
| [1] | EN 755-1, アルミニウムおよびアルミニウム合金 — 押出ロッド/バー、チューブおよびプロファイル — 1: 検査および納品の技術的条件 |
| [2] | EN 755-2, アルミニウムおよびアルミニウム合金 — 押出ロッド/バー、チューブおよびプロファイル — 2: 機械的特性 |
| [3] | ASTM B221-08, アルミニウムおよびアルミニウム合金押出バー、ロッド、ワイヤ、プロファイル、およびチューブの標準仕様 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 79, Light metals and their alloys, Subcommittee SC 6, Wrought aluminium and aluminium alloys.
This fourth edition cancels and replaces the third edition (ISO 6362-2:2012), which has been technically revised.
ISO 6362 consists of the following parts, under the general title Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles:
- Part 1: Technical conditions for inspection and delivery
- Part 2: Mechanical properties
- Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
- Part 4: Profiles — Tolerances on shape and dimensions
- Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
- Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
- Part 7: Chemical composition
1 Scope
This part of ISO 6362 specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications.
It applies to extruded products.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6362-1, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — 1: Technical conditions for inspection and delivery
- ISO 6892-1, Metallic materials — Tensile testing — 1: Method of test at room temperature
- ASTM B557M, Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6362-1 apply.
Bibliography
| [1] | EN 755-1, Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — 1: Technical conditions for inspection and delivery |
| [2] | EN 755-2, Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — 2: Mechanical properties |
| [3] | ASTM B221-08, Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |