※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 6363-6 は、技術委員会 ISO/TC 79, 軽金属およびその合金、小委員会 SC 6, 鍛造アルミニウムおよびアルミニウム合金によって作成されました。
ISO 6363 は、一般的なタイトルである鍛造アルミニウムおよびアルミニウム合金 - 冷間引抜棒/棒、管およびワイヤの下にある次の部分で構成されています。
- Part 1: 検査および納品の技術的条件
- Part 2: 機械的特性
- Part 3: 引き抜き丸棒と線 - 形状と寸法の公差 (直径の対称的なプラスとマイナスの公差)
- Part 4: 描画された長方形のバーとワイヤ — 形状と寸法の公差
- Part 5: 正方形および六角形のバーとワイヤーの描画 — 形状と寸法の公差
- Part 6: 丸管の描画 — 形状と寸法の公差
1 スコープ
ISO 6363 のこの部分は、鍛造アルミニウムおよびアルミニウム合金の引き抜き丸管 (シームレスおよび舷窓) の形状および寸法の公差を指定します。
ISO 6363 のこの部分は、冷間引き抜きの丸管に適用されます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6363-1, 鍛造アルミニウムおよびアルミニウム合金 — 冷間引抜きロッド/バー、チューブおよびワイヤ — 1: 検査および納品の技術的条件
3 用語と定義
このドキュメントの目的のために、ISO 6363-1 に記載されている用語と定義が適用されます。
参考文献
| [1] | 鍛造アルミニウム合金 (「ティール シート」とも呼ばれる) の国際合金指定および化学組成制限の登録。アルミニウム協会、バージニア州アーリントン。入手先: http://www.aluminum.org/tealsheets |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6363-6 was prepared by Technical Committee ISO/TC 79, Light metals and their alloys, Subcommittee SC 6, Wrought aluminium and aluminium alloys.
ISO 6363 consists of the following parts, under the general title Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires:
- Part 1: Technical conditions for inspection and delivery
- Part 2: Mechanical properties
- Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
- Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
- Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
- Part 6: Drawn round tubes — Tolerances on form and dimensions
1 Scope
This part of ISO 6363 specifies the tolerances on form and dimensions of wrought aluminium and aluminium alloy drawn round tubes (seamless and porthole).
This part of ISO 6363 applies to cold-drawn round tubes.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6363-1, Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — 1: Technical conditions for inspection and delivery
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6363-1 apply.
Bibliography
| [1] | Registration of International Alloy Designations and Chemical Composition Limits for Wrought Aluminium Alloys (also known as"Teal sheets"). The Aluminum Association, Arlington, VA. Available at: http://www.aluminum.org/tealsheets |