※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。精神的および非政府組織を管理する国際組織も、ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 6388 は、ISO/TC 91界面活性剤技術委員会によって作成されました。
この第 2 版は、第 1 版 (ISO 6388: 1983) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。
この国際規格の附属書 A は情報提供のみを目的としています。
導入
一般に、界面活性剤のレオロジー挙動は回転粘度計を使用して測定されます。回転粘度計は、プラスチックや塗料など、複雑なレオロジー挙動を持つ物質の研究に適しています。
この国際規格の開発にあたり、定義と制度についてはプラスチックを扱う ISO 3219 が参照されています。ただし、この国際規格で規定されている方法は界面活性剤に特有のものです。
1 スコープ
この国際規格は、同軸の円筒、円錐、平面を使用して、単独または混合物の形態の非固体界面活性剤、および本質的に界面活性剤からなる製品の流動特性を特性評価する方法を規定しています。 、またはダブルコーンなどの回転粘度計。
注 —界面活性剤を含むシステムのレオロジー挙動には、異常が見られることがよくあります。これらは主に、界面活性剤の分子が会合する傾向によるものです。レオロジー挙動は、基本的に界面活性剤の性質と濃度の関数として変化します。温度、無機塩の濃度、その他の物質の存在のわずかな変動も、界面活性剤のレオロジー挙動に変動を引き起こす可能性があります。レオロジーパターン自体が変化する場合もあります。この国際規格で指定されている方法では、これらすべての要素を考慮しようとしています。特定の非常に特殊な界面活性剤の場合、他の測定方法が使用される場合があります。たとえば、ニュートン系の場合は、より正確な ISO 3104 および ISO 1652 を参照する必要があります。
システムのニュートン特性が問題となる場合、この国際規格で指定されている方法を使用すると、測定を実行できる測定機器を選択することができます。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 607:1980, 界面活性剤および洗剤 — サンプル分割の方法。
- ISO 862:1984, 界面活性剤 - 語彙。
付録A
参考文献
| ISO 1652:1985, ゴムラテックス - 粘度の測定。 | |
| ISO 3104:1976, 石油製品 - 透明液体と不透明液体 - 動粘度の測定と動粘度の計算。 | |
| ISO 3219:1977, プラスチック — 液体、乳化または分散状態のポリマー — 定義されたせん断速度で動作する回転粘度計による粘度の測定。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 6388 was prepared by Technical Committee ISO/TC 91, Surface active agents.
This second edition cancels and replaces the first edition (ISO 6388: 1983), of which it constitutes a minor revision.
Annex A of this International Standard is for information only.
Introduction
The rheological behaviour of surface active agents in general is determined using a rotational viscometer, which is suitable for studying substances having a complex rheological behaviour, e.g. plastics, paints.
In developing this International Standard, reference has been made to ISO 3219, which deals with plastics, for the definitions and the apparatus. The method specified in this International Standard, however, is specific to surface active agents.
1 Scope
This International Standard specifies a method for the characterization of the flow properties of non-solid surface active agents, either alone or in the form of mixtures, and of products consisting essentially of surface active agents, using a co-axial cylinder, cone and plane, or double cone, etc., rotational viscometer.
NOTE — The rheological behaviour of a system containing surface active agents is frequently marked by anomalies. These are mostly due to the tendency of the molecules of surface active agents to associate. The rheological behaviour varies essentially as a function of the nature and concentration of the surface active agents. Small variations in temperature, in the concentration of mineral salts, and the presence of any other substance, may also cause variations in the rheological behaviour of surface active agents; even the rheological pattern itself may sometimes be changed. The method specified in this International Standard attempts to take account of all these factors. In the case of certain very special surface active agents, other methods of determination may be used. For newtonian systems, for example, reference should be made to ISO 3104 and ISO 1652, which are much more precise.
When the newtonian character of a system is in question, the method specified in this International Standard will make it possible to select measuring equipment which will allow a determination to be carried out.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 607: 1980, Surface active agents and detergents — Methods of sample division.
- ISO 862: 1984, Surface active agents — Vocabulary.
Annex A
Bibliography
| ISO 1652: 1985, Rubber latex — Determination of viscosity. | |
| ISO 3104: 1976, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity. | |
| ISO 3219: 1977, Plastics — Polymers in the liquid, emulsified or dispersed state — Determination of viscosity with a rotational viscometer working at defined shear rate. |