※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 17, 鉄鋼、SC 16 サブ委員会、コンクリートの補強およびプレストレスト用鋼によって作成されました。
1 スコープ
この文書は、コンクリートの補強材として使用される熱間圧延ステンレス鋼普通棒およびリブ付き棒に関する技術要件を指定します。
バー、コイル、およびコイルから外された製品の形で納品される鋼材に適用されます。完成品から製造されたリブ付きバーには適用されません。
製造工程はメーカーの裁量に任されております。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 148-1, 金属材料 — シャルピー振り子衝撃試験 — Part 1: 試験方法
- ISO 6935-1, コンクリート補強用鋼 — Part 1: 普通s
- ISO 6935-2, コンクリート補強用鋼 — Part 2: リブ付きバー
- ISO 14284, 鋼と鉄 - 化学組成測定のためのサンプルのサンプリングと準備
- ISO 15510, ステンレス鋼 - 化学組成
- ISO 15630-1, コンクリートの補強およびプレストレス用鋼 — 試験方法 — Part 1: 鉄筋、ロッドおよびワイヤー
- EN 196-1, セメントの試験方法 - Part 1: 強度の測定
- EN 197-1, セメント - Part 1: 一般的なセメントの組成、仕様、および適合基準
3 用語と定義
この文書の目的上、ISO 6935-1, ISO 6935-2, ISO 15510 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
ステンレス鋼棒
少なくとも 10.5% (質量分率) のクロムと最大 1.2% (質量分率) の炭素を含むステンレス鋼棒
参考文献
| 1 | ISO 404, 鉄鋼および鉄鋼製品 — 一般的な技術提供要件 |
| 2 | ISO 3534-1, 統計 — 語彙と記号 — Part 1: 一般的な統計用語と確率で使用される用語 |
| 3 | ISO 10144, コンクリートの補強およびプレストレス用鋼 - 棒鋼および鋼線の認証スキーム |
| 4 | ISO 15835, コンクリート補強用鋼 — 棒のメカニカルスプライス用の補強カプラー |
| 5 | ISO 16020:2005, コンクリートの補強およびプレストレスト用鋼 — 語彙 |
| 6 | ISO 3651-2, ステンレス鋼の粒界腐食に対する耐性の測定 - Part 2: フェライト系、オーステナイト系およびフェライト - オーステナイト (二相) ステンレス鋼 - 硫酸を含む媒体での腐食試験 |
| 7 | ISO/IEC Guide 2, 標準化および関連活動 - 一般用語 |
| 8 | EN 10088-1, ステンレス鋼 - Part 1: ステンレス鋼のリスト |
| 9 | PREN 10370,コンクリート補強用鋼 - ステンレス鋼 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee Technical Committee ISO/TC 17, Steel, Subcommittee SC 16, Steels for the reinforcement and prestressing of concrete.
1 Scope
This document specifies technical requirements for hot rolled stainless steel plain bars and ribbed bars used as reinforcement in concrete.
It is applicable to steel delivered in the form of bars, coils and de-coiled products. It does not apply to ribbed bars produced from finished products
The production process is at the discretion of the manufacturer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method
- ISO 6935-1, Steel for the reinforcement of concrete — Part 1: Plain barss
- ISO 6935-2, Steel for the reinforcement of concrete — Part 2: Ribbed bars
- ISO 14284, Steel and iron — Sampling and preparation of samples for the determination of chemical composition
- ISO 15510, Stainless steels — Chemical composition
- ISO 15630-1, Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire
- EN 196-1, Methods of testing cement — Part 1: Determination of strength
- EN 197-1, Cement — Part 1: Composition, specifications and conformity criteria for common cements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6935-1, ISO 6935-2, ISO 15510 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
stainless steel bars
stainless steel bars with at least 10,5 % (mass fraction) of chromium and max. 1,2 % (mass fraction) of carbon
Bibliography
| 1 | ISO 404, Steel and steel products — General technical delivery requirements |
| 2 | ISO 3534-1, Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
| 3 | ISO 10144, Steels for the reinforcement and prestressing of concrete — Certification scheme for steel bars and wires |
| 4 | ISO 15835, Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars |
| 5 | ISO 16020:2005, Steel for the reinforcement and prestressing of concrete — Vocabulary |
| 6 | ISO 3651-2, Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| 7 | ISO/IEC Guide 2, Standardization and related activities — General vocabulary |
| 8 | EN 10088-1, Stainless steels - Part 1: List of stainless steels |
| 9 | prEN 10370 Steel for the reinforcement of concrete - Stainless steel |