※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 649/2 は、技術委員会 ISO/TC 48, 実験用ガラス器具および関連装置によって開発され、1979 年 9 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | ポルトガル |
| ブラジル | イタリア | ルーマニア |
| カナダ | 大韓民国 | 南アフリカ共和国 |
| チェコスロバキア | リビア アラブ ジャマヒリヤ | スペイン |
| フランス | メキシコ | イギリス |
| ドイツ、フランス | オランダ | ソビエト連邦 |
| ハンガリー | ポーランド |
この文書の不承認を表明した加盟団体はありませんでした。
国際規格 ISO 649/1 および ISO 649/2 は、ISO 勧告 R 649-1968 を取り消し、置き換えます。これらは技術的な改訂を構成します。
1 適用範囲と適用分野
ISO 649 のこの部分は、一般的な目的での密度比重計の試験方法と使用法を規定しています。
この国際規格のPart 1 部は、一般目的の密度比重計の仕様を示しています。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 649/2 was developed by Technical Committee ISO/TC 48, Laboratory glassware and related apparatus, and was circulated to the member bodies in September 1979.
It has been approved by the member bodies of the following countries:
| Australia | India | Portugal |
| Brazil | Italy | Romania |
| Canada | Korea, Rep. of | South Africa, Rep. of |
| Czechoslovakia | Libyan Arab Jamahiriya | Spain |
| France | Mexico | United Kingdom |
| Germany, F.R. | Netherlands | USSR |
| Hungary | Poland |
No member body expressed disapproval of the document.
International Standards ISO 649/1 and ISO 649/2 cancel and replace ISO Recommendation R 649-1968, of which they constitute a technical revision.
1 Scope and field of application
This part of ISO 649 specifies the test methods and use of density hydrometers for general purposes.
Part 1 of this International Standard gives the specification for density hydrometers for general purposes.
2 References
- ISO 91/1, Petroleum measurement tables — 1: Tables based on reference temperatures of 15 °C and 60 °F. 1)
- ISO 649/1, Laboratory glassware — Density hydrometers for general purposes — 1: Specification.
- ISO 650, Relative density 60/60 degrees F hydrometers for general purposes.
- ISO 653, Long solid-stem thermometers for precision use.
- ISO 654, Short solid-stem thermometers for precision use.
- ISO 655, Long enclosed-scale thermometers for precision use.
- ISO 656, Short enclosed-scale thermometers for precision use.
- ISO 3507, Pyknometers.
- ISO 4788, Laboratory glassware — Graduated measuring cylinders.