※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 6520-2 は、技術委員会 ISO/TC 44, 溶接および関連プロセス、小委員会 SC 7, 表現および用語によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6520-2:2001) を取り消し、置き換えます。
ISO 6520 は、溶接および関連プロセス - 金属材料の幾何学的欠陥の分類という一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 融接
- Part 2: 加圧溶接
ISO 6520 のこの部分のあらゆる側面の公式解釈の要求は、国の標準化団体を通じて ISO/TC 44/SC 7 の事務局に送信する必要があります。これらの機関の完全なリストは、 www.iso.org にあります。
1 スコープ
ISO 6520 のこの部分は、加圧溶接で発生する可能性のある欠陥を収集して分類しています。統一指定が指定されています。圧接によるさまざまな欠陥の種類、形状、および寸法のみが含まれています。冶金上の偏差は考慮されていません。追加の応力、負荷、または環境要因など、溶接作業以外によって生じる欠陥は、ISO 6520 のこの部分ではカバーされていません。
言及された欠陥の結果と特定の構造の使用に関する情報は提供されていません。これは、ジョイントの特定の要件に依存するためです。
注記ISO の 3 つの公式言語のうちの 2 つである英語とフランス語で使用される用語に加えて、このドキュメントではドイツ語で同等の用語を示します。これらは、ドイツのメンバー団体 (DIN) の責任の下で公開されており、情報提供のみを目的としています。 ISO用語と見なすことができるのは、公用語で与えられた用語と定義のみです。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6520-1, 溶接および関連プロセス — 金属材料の幾何学的欠陥の分類 — 1: 融接
参考文献
| [1] | ISO 4063, 溶接および関連プロセス — プロセスの命名法および参照番号 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6520-2 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 7, Representation and terms.
This second edition cancels and replaces the first edition (ISO 6520-2:2001) which has been technically revised.
ISO 6520 consists of the following parts, under the general title Welding and allied processes — Classification of geometric imperfections in metallic materials:
- Part 1: Fusion welding
- Part 2: Welding with pressure
Requests for official interpretations of any aspect of this part of ISO 6520 should be directed to the Secretariat of ISO/TC 44/SC 7 via your national standards body. A complete listing of these bodies can be found at www.iso.org .
1 Scope
This part of ISO 6520 collects and classifies the possible imperfections in welds made with pressure. A uniform designation is specified. Only the type, shape, and dimensions of the different imperfections caused by welding with pressure are included. Metallurgical deviations are not taken into account. Imperfections produced other than by the welding operation, e.g. additional stresses, loads or environmental factors, are not covered by this part of ISO 6520.
Information concerning the consequences of the imperfections mentioned and the use of particular structures is not given, because this depends on the specific requirements of the joint.
NOTE In addition to terms used in English and French, two of the three official ISO languages, this document gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN) and are given for information only. Only the terms and definitions given in the official languages can be considered as ISO terms.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6520-1, Welding and allied processes — Classification of geometric imperfections in metallic materials — 1: Fusion welding
Bibliography
| [1] | ISO 4063, Welding and allied processes — Nomenclature of processes and reference numbers |