この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
1972 年以前は、技術委員会の作業の結果が ISO 勧告として発行されていました。これらの文書は現在、国際規格に変換されている過程にあります。このプロセスの一環として。技術委員会 ISO/TC 48 は、ISO 勧告 R 652 を見直し、技術的に変換に適していると判断しました。したがって、国際規格 ISO 652 は、技術的に同一である ISO 勧告 R 652-1968 に取って代わります。
ISO 勧告 R 652 は、次の国の加盟機関によって承認されました。
| オーストラリア | フランス | ポーランド |
| オーストリア | ギリシャ | 南アフリカ共和国 |
| ベルギー | ハンガリー | スペイン |
| ブラジル | インド | スイス |
| ブルガリア | アイルランド | 七面鳥 |
| カナダ | イタリア | イギリス |
| チリ | 日本 | アメリカ |
| コロンビア | 大韓民国 | ユーゴスラビア |
| チェコスロバキア | オランダ | |
| エジプト、アラブ共和国 | ニュージーランド |
次の国の加盟団体は、技術的な理由で勧告の不承認を表明しました。
ドイツ
ISO/R 652 を国際規格に変更することを承認しなかった加盟団体はありませんでした。
1 適用範囲と適用分野
この国際規格は、ボンベ熱量測定および温度変化の正確な測定が必要なその他の目的で使用する一連の短距離密閉型温度計の要件を規定しています。温度計には 0 °C で補助目盛りが付いていないため、使用直前に標準温度計と照合しない限り、温度の絶対測定 (熱量測定では通常必要ありません) には適していません。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published as ISO Recommendations; these documents are now in the process of being transformed into International Standards. As part of this process. Technical Committee ISO/TC 48 has reviewed ISO Recommendation R 652 and found it technically suitable for transformation. International Standard ISO 652 therefore replaces ISO Recommendation R 652-1968 to which it is technically identical.
ISO Recommendation R 652 was approved by the Member Bodies of the following countries:
| Australia | France | Poland |
| Austria | Greece | South Africa, Rep. of |
| Belgium | Hungary | Spain |
| Brazil | India | Switzerland |
| Bulgaria | Ireland | Turkey |
| Canada | Italy | United Kingdom |
| Chile | Japan | U.S.A. |
| Colombia | Korea Rep. of | Yugoslavia |
| Czechoslovakia | Netherlands | |
| Egypt, Arab Rep. of | New Zealand |
The Member Body of the following country expressed disapproval of the Recommendation on technical grounds:
Germany
No Member Body disapproved the transformation of ISO/R 652 into an International Standard.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies requirements for a series of short-range enclosed-scale thermometers for use in bomb calorimetry and for other purposes where an accurate measurement of a change of temperature is required. The thermometers are not provided with auxiliary scales at 0 °C and are therefore not suited to the absolute measurement of temperature (which is not normally required in calorimetry), unless they are checked against a standard thermometer immediately before use.