この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての加盟団体は、その委員会に代表される権利を有し、政府および非政府の国際機関も ISO と連携して作業に参加します。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 657/V は、鉄鋼技術委員会 ISO/TC 17 によって作成され、 1975 年 3 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストリア | ハンガリー | ポルトガル |
| ブラジル | インド | ルーマニア |
| ブルガリア | イラン | 南アフリカ共和国 |
| チリ | アイルランド | スペイン |
| チェコスロバキア | イタリア | スウェーデン |
| デンマーク | メキシコ | スイス |
| エジプト、アラブ共和国 | オランダ | 七面鳥 |
| フィンランド | ニュージーランド | イギリス |
| フランス | ノルウェー | ソビエト連邦 |
| ドイツ | ポーランド | ユーゴスラビア |
以下の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
| オーストリア | カナダ | アメリカ合衆国 |
| ベルギー | 日本 |
1 適用範囲と分野
この国際規格は、ISO/R 657/I および ISO/R 657/II のメートル寸法、または ISO/R 657/II のインチ寸法に従って、脚の長さが等しいまたは等しくない熱間圧延鋼アングルに適用されるメートルおよびインチの寸法公差を指定します。 R 657/III および ISO/R 657/I
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee, international organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 657/V was drawn up by Technical Committee ISO/TC 17, Steel, and was circulated to the Member Bodies in March 1975.
It has been approved by the Member Bodies of the following countries:
| Austria | Hungary | Portugal |
| Brazil | India | Romania |
| Bulgaria | Iran | South Africa, Rep. of |
| Chile | Ireland | Spain |
| Czechoslovakia | Italy | Sweden |
| Denmark | Mexico | Switzerland |
| Egypt, Arab Rep. of | Netherlands | Turkey |
| Finland | New Zealand | United Kingdom |
| France | Norway | U.S.S.R. |
| Germany | Poland | Yugoslavia |
The Member Bodies of the following countries expressed disapproval of the document on technical grounds:
| Austria | Canada | U.S.A. |
| Belgium | Japan |
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies metric and inch dimensional tolerances applicable to hot-rolled steel angles having either equal or unequal leg lengths in accordance with the metric dimensions of ISO/R 657/I and ISO/R 657/II or the inch dimensions of ISO/R 657/III and ISO/R 657/IV.