※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6702-2 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 9, 航空貨物および地上機器によって作成されました。
ISO 6702 は、 「航空機 — 機内重量およびバランス システムの要件」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 一般
- Part 2: デザイン、パフォーマンス、インターフェイスの特性
1 スコープ
ISO 6702 のこの部分では、ISO 6702-1 のクラス I またはクラス II の一般要件を満たす民間輸送機の機内重量バランス システム (OBWBS) に必要な詳細な設計、性能、およびインターフェース特性を指定します。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 6702-2 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Sub-Committee SC 9, Air cargoand ground equipment.
ISO 6702 consists of the following parts, under the general title Aircraft — Requirements for on-board weight and balance systems:
- Part 1: General
- Part 2: Design, performance and interface characteristics
1 Scope
This part of ISO 6702 specifies the detailed design, performance and interface characteristics required for civil transport aircraft on-board weight and balance systems (OBWBS) meeting the general requirements of ISO 6702-1, of class I or class II.