※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 6746-2 は、技術委員会 ISO/TC 127, 土工機械、小委員会 SC 4, 商業命名法、分類および評価によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 6742-2:1987) を廃止し、置き換えるものです。
ISO 6746 は、 「土工機械 - 寸法とコードの定義」という一般タイトルのもと、次の部分で構成されています。
- Part 1: ベースマシン
- Part 2: 機器と付属品
1 スコープ
ISO 6746 のこの部分では、用語標準および商用仕様における土工機械の機器および付属品の寸法を定義するための参照システムと、それらを識別するためのコーディング システムを指定します。
ISO 6165 で定義されている基本的な種類の土工機械の機器および付属品に適用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6165, 土工機械 — 基本タイプ — 語彙
3 用語と定義
この文書の目的のために、ISO 6165 および以下に示されている用語と定義が適用されます。
3.1
三次元基準系
土工機械の寸法を決定するために使用されるシステム
3.1.1
ゼロ Y 平面
機械の長手方向の中心線を通る垂直面
3.1.2
Xプラン
Y 平面に垂直な任意の垂直平面
3.1.3
Zプラン
X 平面と Y 平面に垂直な任意の水平面
3.1.4
正の座標
正の方向、ゼロ X 平面から前方、ゼロ Y 平面から右、ゼロ Z 平面の上
注記 1: X, Y, Z 軸の交点 (ゼロ面) は、通常、明確に定義された基点に位置します。つまり、ISO 5353 で定義されている座席の SIエンジンのクランクシャフトの中心線。トラクターブルドーザーのスプロケットまたは後車軸の中心線。機械測定用のアース線。
注記 2:構成要素 (例: エンジン、シート) のみが示されている場合、X, Y, Z 軸の交点 (ゼロ面) からの軸の位置と正の方向は、機械に対する構成要素の通常予想される方向 (つまり、エンジンの 1 番シリンダーが機械の前方、シートが正面を向いている) を想定します。
図1 — 3次元基準系
3.2
接地基準面
GRP
測定のために機械が置かれる平面: ベース機械の場合は、硬くて水平面。機器および付属品の場合、硬くて平らな表面または圧縮された土のいずれか
注記 1:使用される表面は、機械、その機器、付属品の用途によって異なります。これは、特定の ISO 用語標準または商用仕様を開発するときに定義する必要があります。
3.3
ベースマシン
キャブまたはキャノピー、および必要に応じてオペレーター保護構造を備えた機械。機器や付属品はありませんが、そのような機器や付属品に必要な取り付け具を備えた機械
3.4
装置
アタッチメントが機械の主要な設計機能を実行できるようにする、ベース マシンに取り付けられたコンポーネントのセット
3.5
アタッチメント
特定の用途のためにベースマシンまたは機器に取り付けることができるコンポーネントのアセンブリ
3.6
コンポーネント.コンポーネント
ベースマシン、機器、または付属品の部品または部品のアセンブリ
参考文献
| 1 | ISO 5353, 土工機械、農業および林業用のトラクターおよび機械 — シートインデックスポイント |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6746-2 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 4, Commercial nomenclature, classification and rating.
This third edition cancels and replaces the second edition (ISO 6742-2:1987), which has been technically revised.
ISO 6746 consists of the following parts, under the general title Earth-moving machinery — Definitions of dimensions and codes:
- Part 1: Base machine
- Part 2: Equipment and attachments
1 Scope
This part of ISO 6746 specifies a reference system for defining, and a coding system for identifying, equipment and attachment dimensions for earth-moving machinery in terminology standards and commercial specifications.
It is applicable to the equipment and attachments of basic types of earth-moving machinery as defined in ISO 6165.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6165, Earth-moving machinery — Basic types — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.
3.1
three-dimensional reference system
system used to determine dimensions of earth-moving machines
3.1.1
zero Y plane
vertical plane which passes through the longitudinal centreline of the machine
3.1.2
X plane
any vertical plane perpendicular to the Y plane
3.1.3
Z plane
any horizontal plane perpendicular to the X and Y planes
3.1.4
positive coordinate
positive direction, forward from the zero X plane, right from the zero Y plane, and above the zero Z plane
Note 1 to entry: The intersection of the X, Y, Z axes (zero planes) is normally located at a well-defined base point: i.e. SIP for a seat as defined in ISO 5353; crankshaft centreline for an engine; sprocket or rear axle centreline for a tractor-dozer; ground line for machine measurements.
Note 2 to entry: If only components (e.g. engine, seat) are shown, the location and positive direction of the axis from the intersection of the X, Y, Z axes (zero planes) assume the normally expected orientation of the component to a machine, i.e. number one cylinder of engine to the front of the machine, seat facing to the front.
Figure 1 — Three-dimensional reference system
3.2
ground reference plane
GRP
plane on which the machine is placed for measurements: in the case of the base machine, a hard, level surface; in the case of equipment and attachments, either a hard, level surface or compacted earth
Note 1 to entry: The surface used depends on the intended use of the machine and its equipment and attachments. This needs to be defined when developing specific ISO terminology standards or commercial specifications.
3.3
base machine
machine with a cab or canopy and operator-protective structures if required, without equipment or attachments but possessing the necessary mountings for such equipment and attachments
3.4
equipment
set of components mounted onto the base machine which allows an attachment to perform the primary design function of the machine
3.5
attachment
assembly of components that can be mounted onto the base machine or equipment for specific use
3.6
component
part or an assembly of parts of a base machine, equipment or an attachment
Bibliography
| 1 | ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |