この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 6841 は ISO/TC 91界面活性剤技術委員会によって作成されました。
この第 2 版は、第 1 版 (ISO 6841:1983) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。
導入
アニオン性活性物質含有量の測定に二相滴定を使用する場合、物質の平均相対分子量を知る必要があります。
正確かつ迅速な方法は、モノスルホン化生成物の製造に使用されるアルキルベンゼンの平均相対分子量を気液クロマトグラフィー (GLC) によって測定することから構成されます。それぞれのモノスルホン酸塩またはモノスルホン酸の相対分子量は、SO 3 Na 基から Na を引いた相対分子量、またはSO3 H 基から H を引いた相対分子量を加算することによって計算できます。
GLC 技術は直鎖アルキルベンゼンにのみ適用できます。分岐鎖タイプではクロマトグラムが生成され、個々の鎖の相対分子量を同定したり計算したりすることが不可能になるためです。
注 —インダン、テトラヒドロナフタレンなどの相対分子量の低いオルト縮合多環式炭化水素誘導体、および分枝鎖アルキルベンゼンは、分析される工業用直鎖アルキルベンゼンスルホン酸ナトリウムの相対分子量の計算には考慮されません。
1 スコープ
この国際規格は、工業用直鎖アルキルベンゼンスルホン酸ナトリウム分子の平均相対質量を決定するための気液クロマトグラフィー (GLC) 方法を規定しています。
2 基準参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下にリストされている規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 607:1980, 界面活性剤および洗剤 — サンプル分割の方法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 6841 was prepared by Technical Committee ISO/TC 91, Surface active agents.
This second edition cancels and replaces the first edition (ISO 6841:1983), of which it constitutes a minor revision.
Introduction
When using the two-phase titration for the determination of anionic active matter content, it is necessary to know the mean relative molecular mass of the substance.
An accurate and rapid method consists of determining by gas-liquid chromatography (GLC) the mean relative molecular mass of the alkylbenzene used to manufacture the monosulfonated products; the relative molecular mass of the respective monosulfonate or monosulfonic acid can then be calculated by adding the relative molecular mass of the S03Na group minus Na, or that of the S03H group minus H.
The GLC technique is only applicable to straight-chain alkylbenzenes, since branchedchain types will give chromatograms from which it is impossible to identify and to calculate the relative molecular mass for individual chains.
NOTE — Any ortho-fused polycyclic hydrocarbon derivatives of low relative molecular mass present, such as indan, and tetrahydronaphthalene, as well as branched-chain alkylbenzenes, are not taken into account in the calculation of the relative molecular mass of the technical straightchain sodium alkylbenzenesulfonate analysed.
1 Scope
This International Standard specifies a gas-liquid chromatography (GLC) method for the determination of the mean relative molecular mass of technical straight-chain sodium alkylbenzenesulfonates.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard listed below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 607: 1980, Surface active agents and detergents — Methods of sample division.